NEN-ISO IEC 8632-1-1994 Information technology Computer graphics Metafile for the storage and transfer of picture description information Part 1 Functional specification (ISO IEC 8.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D689-A3-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 90 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为90 A的聚氯乙烯(PVC)柔性材料 列于标准WSK-.pdf

FORD WSK-M4D689-A4-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 95 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为95 A的聚氯乙烯(PVC)柔性材料 列于标准WSK-.pdf

FORD WSK-M4D689-A5-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 75 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为75 A的柔性聚氯乙烯(PVC) 与标准FORD WS.pdf

FORD WSK-M4D689-A6-2012 POLYVINYL CHLORIDE (PVC) FLEXIBLE 65 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D689-A1).pdf

FORD WSK-M4D689-A7-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 60 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为60 A的柔性聚氯乙烯(PVC) 与标准FORD WS.pdf

FORD WSK-M4D692-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D55的乙醚弹性体(T.pdf

FORD WSK-M4D692-A2-1989 THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS HEAT STABILIZED EXTRUSION MOLDING COMPOUND (Shown on WSK-M4D692-A1)《硬度为55 D的热塑性聚酯-乙醚.pdf

FORD WSK-M4D693-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D55的乙醚弹性体(T.pdf

FORD WSK-M4D693-A2-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS BLACK INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD.pdf