NF A03-655-1986 Iron and steel Free-cutting steels and structural steel Method of control of machinability by turning using sintered metallic carbide cutting tools 《钢铁 易切削钢和结构钢 用烧制.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS K F0 031-1989 Grains of fused aluminJuti oxide and sillcou carbide for coated abrasive products raiv slze dlstrlbutltm and designatlon《砂纸产品用熔解氧化铝和金刚砂颗粒 粒度分布和标示》.pdf

JUS K F0 032-1989 Grains of fused aluminium oxJde and slllcon carbide for coated abrasive products Graln sir e analysls of macrogrlts P 12 to P 220《砂纸产品用熔解氧化铝和金刚砂的颗粒 P12-P220大粒的粒度分.pdf

JUS K F0 033-1989 GraJns of fused aluminium oxlde and sIlIcon carbide for coated abrasive producls Grain slze analysis of microgrits P 240 to P 1200《砂纸产品用熔解氧化铝和金刚砂的颗粒 P240-P1200微粒的.pdf

JUS K F0 081-1989 Grains of diamond and cubic boroo nitri e for bonded abrasive products Grain sizes dlstribution and designat ion《粘结磨具用菱形和立方氮化硼的颗粒 粒径分布和标示》.pdf

JUS K F0 082-1989 Grains of iamon and cublc boron nitrIde for bonded abrasive products Hatbod of test of macrogrits《粘结磨具用菱形和立方氮化硼颗粒 微砾检测方法》.pdf

JUS K F1 005-1990 Bonded abrasive products Classification specification of product designation and marking《粘结模具 产品的分类、规格要求、标示和标识》.pdf

JUS K F1 006-1990 Bonded abrasive products Limit deviations and run-out tolerances《粘结模具 极限偏差和摆差》.pdf

JUS K F1 007-1990 Bon ed abrasive products Static balancing of grin ing wheels Testing《粘结磨具 砂轮的静平衡 检测》.pdf

JUS K F1 008-1990 Bonded abrasive pro ucts Safety test breaking of grinding vheels《粘结模具 砂轮破裂安全检测》.pdf