NF A04-307-2002 Non destructive testing - Ultrasonic testing of steel bars 《无损检验 钢棒的超声波检验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NEN-EN 291-1993 Rubber seals Static seals in domestic appliances for combustible gas up to 200 mbar Specification for material《橡胶密封件 压力为200毫巴及以下的家用可燃气体静态密封 材料规范》.pdf

NEN-EN 292-1-1994 Safety of machinery Basic concepts general principles for design Part 1 Basic terminology methodology《机械安全 基本概念，一般设计原理 第1部分：基本术语，方法》.pdf

NEN-EN 293-1993 Oil pressure atomizing nozzles Minimum requirements Testing《油压喷雾器喷嘴 最低要求 检验》.pdf

NEN-EN 294-1993 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs《机械安全 防止上肢触及危险区的安全距离》.pdf

NEN-EN 301-1993 Adhesives phenolic and aminoplastic for load-bearing timber structures Classification and performance requirements《承重木结构用苯酚树脂系列和氦基塑料系列粘合剂：分类及性能要求》.pdf

NEN-EN 302-1-1993 Adhesives for load-bearing timber stuctures Test methods Part 1 Determination of bond strength in longitudinal tensile shear《承重木结构用胶粘剂 检验方法 第1部分：纵向抗拉伸剪切的粘结强度的测定》.pdf

NEN-EN 302-2-1993 Adhesives for load-bearing timber stuctures Test methods Part 2 Determination of resistance to delamination (Laboratory method)《承重木结构用胶粘剂 检验方法 第2部分：抗剥离性测定（实验室法）》.pdf

NEN-EN 302-3-1993 Adhesives for load-bearing timber stuctures Test methods Part 3 Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on t.pdf

NEN-EN 302-4-1993 Adhesives for load-bearing timber stuctures Test methods Part 4 Determination of the effects of wood shrinkage on the shear strength《承重木结构用胶粘剂 检验方法 第4部分：木材收缩对剪切强度.pdf