NF A04-503-1988 Semi-products made from aluminium copper nickel and their alloys Determination of grain size Aluminium and aluminium alloys 《铝、铜、镍及其合金制半成品 晶粒度的测定 铝和铝合金》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5019-2007 Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane《在单屋顶层用加固的氯磺化聚乙烯(CSM)薄板标准规范》.pdf

ASTM D5023-2007 Standard Test Method for Plastics Dynamic Mechanical Properties In Flexure (Three-Point Bending)《塑料的标准试验方法 动态机械性能 弯曲(三点弯曲)》.pdf

ASTM D5023-2015 Standard Test Method for Plastics Dynamic Mechanical Properties In Flexure (Three-Point Bending) 《塑料的标准试验方法 动态机械性能 承弯 (三点弯曲)》.pdf

ASTM D5024-2007 Standard Test Method for Plastics Dynamic Mechanical Properties In Compression《塑料的标准试验方法 动态机械性能 压缩》.pdf

ASTM D5024-2015 Standard Test Method for Plastics Dynamic Mechanical Properties In Compression《塑料的标准试验方法 动态机械性能 承压》.pdf

ASTM D5025-2005 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials《塑料材料的小型燃烧试验用实验室燃烧器的标准规范》.pdf

ASTM D5025-2011 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials《塑料材料的小型燃烧试验用实验室燃烧器的标准规格》.pdf

ASTM D5025-2012 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials《塑料材料的小型燃烧试验用实验室燃烧器的标准规格》.pdf

ASTM D5025-2012e1 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials《用于塑料材料上的小型燃烧试验的实验室燃烧器的标准规格》.pdf