NF A06-507-1957 Chemical analysis of lead and lead oxides Turbidimetric determination of tin 《铅和氧化铅的化学分析 锡的浊度分析法测定》.pdf

相关资源

JIS G1602-1998 铁合金化学分析取样方法(第2部分钨铁、钼铁、钒铁、钛铁和铌铁合金).pdf

JIS G1603-1985 合金化学分析的取样方法(第3部分 磷铁、金属锰、金属硅、金属铬、硅钙及硼铁合金).pdf

JIS H6202-1986 化学分析用铂蒸发器.pdf

JIS G1326-2000 镍铁化学分析方法-解释.pdf

JIS G1301-1987 铁合金化学分析方法通则.pdf

JIS G1320-1968 磷铁化学分析方法.pdf

JIS H6201-1986 化学分析用铂坩埚.pdf

JIS H1012-2001 铜及铜合金的化学分析方法通则.pdf

JIS H1402-2001 钨粉及碳化钨粉的化学分析方法.pdf

JIS H1402-2006 钨粉及碳化钨粉的化学分析方法(修改件1).pdf

猜你喜欢

ASTM D2556-1993a(2005) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties《具有切变速率决定其流速性能的胶粘剂的表观粘度的标准试验方法》.pdf

ASTM D2556-2011 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties 《用切变速率决定其流动性能的胶粘剂的表观粘度的标准试验方法》.pdf

ASTM D2556-2014 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry《用切变速率决定其流动性能的胶粘剂的表观粘度的标准试验方法》.pdf

ASTM D2557-1998(2004) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267 8 to -55&176C (-450 to -67&176F)《温度为-267 8至-55℃(-450至-.pdf

ASTM D2557-1998(2010)e1 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267 8 to -55&176C (-450 to -67&176F)《温度为-267 8至-55176C(-.pdf

ASTM D2559-2004 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions《室外潮湿环境中层压结构木制品用胶粘剂的标准规范》.pdf

ASTM D2559-2009 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions.pdf

ASTM D2559-2010 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions《室外潮湿条件下用结构层压木材制品用胶粘剂标准规范》.pdf

ASTM D2559-2010a Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions《室外潮湿环境中层压结构木制品用胶粘剂的标准规范》.pdf