NF A06-709-1986 Copper and copper alloys Determination of antimony content Rhodamine B spectrometric method 《铜和铜合金 锑含量的测定 若丹明B(Rhondamine B)光谱法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D3926-2005 Standard Test Methods for Percent Solids in Titanium Dioxide Slurries《二氧化钛浆料中固体百分比的标准试验方法》.pdf

ASTM D3926-2005(2011) Standard Test Methods for Percent Solids in Titanium Dioxide Slurries《钛粉(二氧化钛)稀浆中固体百分比标准试验方法》.pdf

ASTM D3928-2000a(2005) Standard Test Method for Evaluation of Gloss or Sheen Uniformity《评价光泽度或光泽均匀性的标准试验方法》.pdf

ASTM D3928-2000a(2010) Standard Test Method for Evaluation of Gloss or Sheen Uniformity《评估色彩或光泽均匀性的标准试验方法》.pdf

ASTM D3928-2000a(2014) Standard Test Method for Evaluation of Gloss or Sheen Uniformity《评估光泽度或光泽均匀性的标准试验方法》.pdf

ASTM D3928-2000a(2018) Standard Test Method for Evaluation of Gloss or Sheen Uniformity.pdf

ASTM D3929-2003 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method《用弯曲梁法通过胶粘剂评定塑料应力断裂的标准试验方法》.pdf

ASTM D3929-2003(2010)e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method《通过使用粘合剂和弯曲梁法测定塑料应力开裂的标准试验方法》.pdf

ASTM D3929-2003(2015) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method《采用使用弯曲梁法的粘合剂评估塑料应力开裂的标准试验方法》.pdf