NF A65-727-1988 Semi-finished products made of magnesium alloys Rectangular section exruded bars Dimensions and tolerances 《镁合金制半成品 矩型材挤制棒 尺寸和公差》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65430-2016 Aerospace series - Sleeves wall thickness 0 25 mm for fasteners with countersunk head Text in German and English《航空航天系列 埋头紧固件用壁厚为0 25mm的套筒 德文和英文文本》.pdf

DIN 65431-2010 Aerospace - Sleeves wall thickness 0 5 mm for fasteners with countersunk head Text in German and English《航空航天 埋头紧固件用壁厚为0 5 mm的套筒 德文和英文文本》.pdf

DIN 65433-2002 Aerospace - Sleeves wall thickness 0 25 mm for fasteners with reduced countersunk head《航空航天 带减径埋头的紧固件用壁厚为0 25mm套筒》.pdf

DIN 65434-2017 Aerospace series - Sleeves - Wall thickness 0 5 mm for fasteners with reduced countersunk head Text in German and English《航空航天系列 小埋头紧固件用壁厚为0 5mm的衬套 德文和英文文本》.pdf

DIN 65435-1989 Aerospace sleeves for fasteners technical specification《航空航天 紧固件用衬套 技术规范》.pdf

DIN 65436-1989 Aerospace standard quality (STQ) and disc quality (DQ) of titanium and titanium alloys requirements and tests《航空航天；钛和钛合金的标准件质量(STQ)和圆盘质量(DQ) 要求和试验》.pdf

DIN 65438-1993 Aerospace bihexagonal head bolts close tolerance with MJ-thread short thread length in titanium alloy nominal tensile strength 1100 MPa for temperatures up to 315 C《.pdf

DIN 65439-1984 Aerospace bihexagonal head bolts close tolerance with MJ-thread medium thread length in steel nominal tensile strength 1250 MPa for temperatures up to 235 C《航空和航天 MJ.pdf

DIN 65440-1984 Aerospace bihexagonal head bolts close tolerance with MJ-thread medium thread length in corrosion resisting steel nominal tensile strength 1250 MPa for temperatures .pdf