NF A65-777-1988 Semi-finished products made of magnesium alloys Round extruded tubes Dimensional tolerances 《镁合金制半成品 圆形挤制管 尺寸公差》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 14126-1999 en Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction (Incorporating corrigendum July 2002)《纤维增强塑料混合物 水平方向压缩能力的.pdf

EN ISO 14129-1997 en Fibre-Reinforced Plastic Composites - Determination of the in-Plane Shear Stress Shear Strain Response Including the in-Plane Shear Modulus and Strength by the.pdf

EN ISO 14130-1997 en Fibre-reinforced plastic composites Determination of apparent interlaminar shear strength by short-beam method《纤维增强塑料复合材料 用短试片法测定表观层间粘合剪切强度》.pdf

EN ISO 14155-2011 en Clinical investigation of medical devices for human subjects - Good clinical practice《医学研究受验者用医疗器械的临床调查 药品优良临床试验规范》.pdf

EN ISO 14159-2008 en Safety of machinery - Hygiene requirements for the design of machinery《机械安全 机械设备设计的保健要求》.pdf

EN ISO 14160-2011 en Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requ.pdf

EN ISO 14161-2009 en Sterilization of health care products - Biological indicators - Guidance for the selection use and interpretation of results《医疗保健产品的消毒 生物指示剂 选择 使用和检验结果解释指南》.pdf

EN ISO 14163-1998 en Acoustics - Guidelines for Noise Control by Silencers《声学 消声器噪声控制指南 包含修改件第1号 Iso 14163-1998》.pdf

EN ISO 14171-2010 4375 Welding consumables - Solid wire electrodes tubular cored electrodes and electrode flux combinations for submerged arc welding of non alloy and fine grain st.pdf