NF C23-553-3-1992 Requirements for the selection installation and use of electrostatic spraying equipment for flammable materials Part 3 hand-held electrostatic flock spry guns wiir .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 6731.9-2005 铝合金化学成分光谱分析方法 第9部分：火焰原子吸收光谱法测定铬含量.pdf

HB 6732-1993 航空紧固件用TB3钛合金棒（线）材.pdf

HB 6733-1993 飞机零部件和整机涂漆工艺质量控制.pdf

HB 6734-1993 贵金属细丝拉伸杨氏模量试验方法.pdf

HB 6735-1993 航空结构钢薄脱碳（含合金贫化）层和增碳（含增氮）层深度测定方法.pdf

HB 6736-1993 金属板材剪切试验方法.pdf

HB 6737-1993 高温合金电阻点焊和缝焊质量检验.pdf

HB 6738-1993 热喷涂耐磨涂层质量检验.pdf

HB 6739-1993 碳纤维复合材料层合板冲击后压缩试验方法.pdf