NF C33-252-2002 Insulated or protected cables for power systems - Single-core cables with polymeric insulation of rated voltages above 30 kV (Um equal to 36 kV) up to 150 kV (Um eq.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M33J10-B2-2010 ENAMEL (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET BASECOAT PROCESSED WITH WSS-M33J10-B1 WSS-M33J10-B4 REDUCED VISCOSITY EXTERIOR TO BE USED WITH FORD WSS.pdf

FORD WSS-M33J10-B3-2010 ENAMEL (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET MIDCOAT PROCESSED WITH WSS-M33J10-B1 WSS-M33J10-B2 WSS-M33J10-B4 REDUCED VISCOSITY EXTERIOR TO BE USED .pdf

FORD WSS-M33J10-B4-2010 ENAMEL (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET CLEARCOAT PROCESSED WITH WSS-M33J10-B1 WSS-M33J10-B2 REDUCED VISCOSITY EXTERIOR TO BE USED WITH FORD WS.pdf

FORD WSS-M33J10-B5-2013 ENAMEL (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET TINTED CLEARCOAT PROCESSED WITH WSS-M33J10-B1 WSS-M33J10-B2 REDUCED VISCOSITY EXTERIOR TO BE USED WITH .pdf

FORD WSS-M33J11-A1-2013 ENAMEL (2 WET) HIGH SOLIDS THERMOSET STRAIGHT SHADE (NON-METALLIC) MONOCOAT PROCESSED WITH WSS-M33J10-A1 EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M33J11-A1-2017 ENAMEL (2 WET) HIGH SOLIDS THERMOSET STRAIGHT SHADE (NON-METALLIC) MONOCOAT PROCESSED WITH WSS-M33J10-A1 EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M33J11-B1-2013 ENAMEL (2 WET) HIGH SOLIDS THERMOSET STRAIGHT SHADE (NON-METALLIC) MONOCOAT PROCESSED WITH WSS-M33J10-B1 REDUCED VISCOSITY EXTERIOR TO BE USED WITH FORD WS.pdf

FORD WSS-M33J11-B1-2017 ENAMEL (2 WET) HIGH SOLIDS THERMOSET STRAIGHT SHADE (NON-METALLIC) MONOCOAT PROCESSED WITH WSS-M33J10-B1 REDUCED VISCOSITY EXTERIOR TO BE USED WITH FORD WS.pdf

FORD WSS-M33J12-A1-2014 ENAMEL WATERBORNE (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET PRIMER PROCESSED WITH WSS-M33J12-A2 WSS-M33J12-A4 EXTERIOR TO BE USED WITH FORD WSS-M99P111.pdf