NF C46-632-1991 FIP bus for exchange of informations between transmitters actuators and programmable controllers - Protocol conformance test for the data link layer PICS protocol i.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS9211 REV A VALID NOTICE 3-2001 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATED DOUBLE HEXAGON EXTENDED WASHER HEAD 375-24 UNJF-3A《0 375-24 UNJF-3A型垫圈顶部加长双重六边形镍镉电镀螺杆机》.pdf

DLA MS9211 REV A-1988 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATED DOUBLE HEXAGON EXTENDED WASHER HEAD 375-24 UNJF-3A《0 375-24 UNJF-3A型垫圈顶部加长双重六边形镍镉电镀螺杆机》.pdf

DLA MS9213 REV A REINST NOTICE 2-1994 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATED DOUBLE HEXAGON EXTENDED WASHER HEAD 500-20 UNJF-3A《0 500-20 UNJF-3A型垫圈顶部加长双重六边形镍镉电镀螺杆机》.pdf

DLA MS9213 REV A VALID NOTICE 3-2001 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATED DOUBLE HEXAGON EXTENDED WASHER HEAD 500-20 UNJF-3A《0 500-20 UNJF-3A型垫圈顶部加长双重六边形镍镉电镀螺杆机》.pdf

DLA MS9213 REV A-1988 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATED DOUBLE HEXAGON EXTENDED WASHER HEAD 500-20 UNJF-3A《0 500-20 UNJF-3A型垫圈顶部加长双重六边形镍镉电镀螺杆机》.pdf

DLA MS9214 REV C REINST NOTICE 2-1994 BOLT - MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD STEEL 5625-18 UNJF-3A《0 5625-18 UNJF-3A型垫圈顶部加长双重六边形锚杆机》.pdf

DLA MS9214 REV C VALID NOTICE 3-2001 BOLT - MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD STEEL 5625-18 UNJF-3A《0 5625-18 UNJF-3A型垫圈顶部加长双重六边形锚杆机》.pdf

DLA MS9214 REV C-1987 BOLT - MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD STEEL 5625-18 UNJF-3A《0 5625-18 UNJF-3A型垫圈顶部加长双重六边形锚杆机》.pdf

DLA MS9215 REV A REINST NOTICE 2-1994 SCREW MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED 138-40 UNJF-3A《0 138-40 UNJF-3A型垫圈顶部钻孔加长双重六边形钢螺杆.pdf