NF C58-300-1997 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 《用国际再利用符号ISO 7000-1135的二次电池和蓄电池组的标记》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 26053-2016 Trusted measurement technique for tank vehicles for the delivery of fuel oil EL diesel fuel and biodiesel to the end-consumer《对最终用户EL型燃油、柴油和生物柴油交付用槽罐车的可靠计量技术》.pdf

DIN 26054-2008 Non-metallic corrugated hose assemblies for chemical products《化学产品用非金属螺纹软管组件》.pdf

DIN 26055-2-2010 Hose assemblies for use in the pharmaceutical and biotechnological industry with hoses of non-metallic materials - Part 2 Silicone rubber hoses《制药和生物技术行业用带非金属材料软管的.pdf

DIN 26055-3-2010 Hose assemblies for use in the pharmaceutical and biotechnological industry with hoses of non-metallic materials - Part 3 Elastomeric hoses with or without liner《制.pdf

DIN 26057-2016 Spiralled hoses made of thermoplastic polyurethan (TPU) with steel wire reinforcement for granulated and powdered materials - Requirements《钢丝强化热塑性聚氨酯 (TPU) 制成的粒状和粉状材.pdf

DIN 2607-2002 Tube bends - For butt-welding of copper《管弯头 铜对接焊用》.pdf

DIN 261-2010 T-head bolts《T形头螺栓》.pdf

DIN 262-1-1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm Nominal Dimensions《螺距为7mm 的带间隙和直侧面的圆螺纹 标称尺寸》.pdf

DIN 262-2-1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of .pdf