NF C61-502 A1-1996 《NF EN 60061-2-1993的修改件1》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 7500-1-2015 en Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1 Tension compression testing machines - Calibration and verifica.pdf

EN ISO 7500-2-2006 en Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 2 Tension Creep Testing Machines - Verification of the Applied Load《金属材料 静态单轴向试验机.pdf

EN ISO 7518-1999 en Technical Drawings - Construction Drawings - Simplified Representation of Demolition and Rebuilding《技术制图 建筑工程制图 拆除和重建的简化画法 ISO 7518-1983》.pdf

EN ISO 7519-1996 en Technical Drawings - Construction Drawings - General Principles of Presentation for General Arrangement and Assembly Drawings《技术制图 建筑工程制图 总体布置图和安装图画法的一般原则ISO 75.pdf

EN ISO 7539-1-2012 en Corrosion of metals and alloys - Stress corrosion testing - Part 1 General guidance on testing procedures《腐蚀金属和合金的应力腐蚀测试 第1部分 通用测试程序的指导意见》.pdf

EN ISO 7539-10-2014 en Corrosion of metals and alloys - Stress corrosion testing - Part 10 Reverse U-bend method《金属和合金的腐蚀 应力腐蚀试验 第10部分 颠倒u型弯管方法(ISO 7539-10 2013)》.pdf

EN ISO 7539-11-2014 en Corrosion of metals and alloys - Stress corrosion cracking - Part 11 Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and.pdf

EN ISO 7539-2-1995 en Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 2 Preparation and Use of Bent-Beam Specimen《金属和合金的腐蚀 应力腐蚀试验 第2部分 弯曲梁试样的制备和使用(ISO 7539-2-1989).pdf

EN ISO 7539-3-1995 en Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 3 Preparation and Use of U-Bend Specimens《金属与合金的腐蚀 应力腐蚀试验 第3部分 U型弯曲试样的制备和使用(ISO 7539-3-1989)》.pdf