NF C79-170-2005 Safety of machinery - Functional safety of electrical electronic and programmable electronic control systems 《机械安全 电气、电子和可编程序电子控制系统的功能安全》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M2F59-D-2003 VINYL FILM (PVC) FORMED HEADLINER GRADE TO BE USED WITH FORD WSS-M99P1111-A 《成型车顶内衬级聚氯乙烯（PVC）薄膜 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2G112-A2-2014 ADHESIVE NITRILE BASE FAST TACK SOLVENT RELEASE TYPE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G234-C-2007 PRIMER METAL FOR ONE COMPONENT FASTER MOISTURE CURING URETHANE ADHESIVE TO BE USED WITH FORD WSS-M99P1111-A 《单组分快速湿固化氨基甲酸酯胶粘剂用金属底漆 与标准FORD WSS-M99P1111-A一.pdf

FORD WSB-M2G234-C3-2007 PRIMER METAL FOR ONE COMPONENT FASTER -- TO BE USED WITH FORD WSS-M99P1111-A 《金属用单组分快干型底漆 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2G279-B-2003 ADHESIVE HOT MELT POLYESTER BASE POWDER FORM TO BE USED WITH FORD WSS-M99P1111-A 《粉末状聚酯基热熔胶粘剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2G279-B2-2003 ADHESIVE HOT MELT POLYESTER BASE WEB FORM TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M2G279-B)《网状聚酯基热熔胶粘剂 与标准FORD WSS-M99P1111-A一起使用 列于标准WSB-M2G2.pdf

FORD WSB-M2G281-D2-2006 ADHESIVE HIGH STRENGTH HEAT CURING EXPANDABLE EPOXY GLASS FIBER LAMINATE METAL REINFORCEMENT TO BE USED WITH FORD WSS-M99P1111-A (Use FORD WSS-M11P64-A1 A.pdf

FORD WSB-M2G281-D3-2006 ADHESIVE HIGH STRENGTH HEAT CURING EXPANDABLE EPOXY GLASS FIBER LAMINATE METAL REINFORCEMENT TO BE USED WITH FORD WSS-M99P1111-A (Use FORD WSS-M11P64-A1 A.pdf

FORD WSB-M2G314-B-2009 PRIMER GLASS MOISTURE CURE TO BE USED WITH FORD WSS-M99P1111-A 《玻璃用湿固化底漆 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M2G314-B2 FORD WSS-M2G314-B2］》.pdf