NF C90-210-2-1-2006 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1 6 MHz to 30 MHz - Part 2-1 residential commercial andts .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16600-1972 Speech transmission over the radiocommunication Requirements for speech legibility and methods of articulation measurements《用无线电话通讯通道传送语言 对语言清晰度要求和清晰度测量方法》.pdf

GOST 16601-1971 Connection for airstarting gas turbine engines Coupling and mounting dimensions《气体涡轮发动机放进空气用接头 连接尺寸和安装尺寸》.pdf

GOST 16602-1980 HSS corrugated blades for assembly reamers Basic dimensions《铰刀用HSS波纹刀片 基本尺寸规格》.pdf

GOST 16603-1980 Wedges for assembly machine reamers with HSS inserted blades Basic dimensions《带HSS镶齿刀头铰刀用楔块 基本尺寸规格》.pdf

GOST 16617-1987 Household electric heating appliances General specifications《家用电热器 通用规范》.pdf

GOST 16621-1980 Round punches with diameter from 1 mm to 24 mm Construction and dimensions《直径1-24mm圆形上模 结构及尺寸》.pdf

GOST 16622-1980 Round punches with cone flange and witgout flange Construction and dimensions《锥形法兰式和无法兰式圆冲锤 结构和尺寸规格》.pdf

GOST 16623-1980 Round punches with increased fit diameter Construction and dimensions《加大配合直径圆形上模 结构及尺寸》.pdf

GOST 16625-1980 Round punches diameter from 24 mm to 52 mm Construction and dimensions《圆冲头直径24-52 mm 结构和尺寸规格》.pdf