NF C93-214-1982 Components for electronic equipment High power fixed and variable wirewound resistors General requirements 《电子设备元件 大功率固定和可调线绕电阻器 一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D240-A2-2007 COATING POWDERED THERMOPLASTIC NYLON (TYPE 11 OR 12) TO BE USED WITH FORD WSS-M99P1111-A 《热塑性尼龙（11或12型）粉末涂层 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D291-F1-2016 FLEXIBLE POLYURETHANE FOAM WATER SEALING DIE CUT C WITH ADHESIVE BACKING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D293-B3-2006 POLYPROPYLENE (PP) HOMOPOLYMER HEAT STABILIZED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (USE WSS-M4D638-B)《再生材料比例.pdf

FORD WSS-M4D309-C-2009 POLYCARBONATE (PC) 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%玻璃纤维增强的聚碳酸酯（PC）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D359-C1-2012 POLYBUTYLENE TEREPHTHALATE (PBT) INJECTION MOLDING COMPOUND GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D365-B3-2012 POLYPROPYLENE 40% CALCIUM CARBONATE FILLED EXTRUSION GRADE - STAMPABLE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D366-B2-2007 POLYAMIDE (PA) 66 25% GLASS FIBER MINERAL REINFORCED HEAT STABILIZED 100% POST INDUSTRIAL NYLON TO BE USED WITH FORD WSS-M99P1111-A 《聚酰胺(PA)66制25%玻璃纤维 矿物.pdf

FORD WSS-M4D429-C3-2013 NYLON (PA) 6 MOLDING COMPOUND 34% MINERAL FILLED EXTERIOR PAINTED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D483-C1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND GENERAL PURPOSE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf