NF C93-346-1998 Fixed inductors for use in electronic and telecommunication equipment Marking codes 《电子和电信设备用固定电感器 标记代码》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSD-M1A304-A2-2002 CAST IRON - LOW ALLOY CHILLED CAMSHAFT TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A304-A1)《激冷铸造凸轮轴用低合金铸铁 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A.pdf

FORD WSD-M1A305-A1-2002 CAST IRON - CHROMIUM ALLOY CHILLED CAMSHAFT TO BE USED WITH FORD WSS-M99P1111-A 《激冷铸造凸轮轴的铬合金铸铁 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A307-A-2002 BEARINGS - STEEL - ROLLER AND BALL THROUGH HARDENED OR CASE HARDENED TO BE USED WITH FORD WSS-M99P1111-A 《完全硬化或表面硬化的的滚轴或球形钢轴承 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A310-A1-2002 STEEL FOR COLD FORMED COIL SPRINGS TO BE USED WITH FORD WSS-M99P1111-A 《冷压成型盘簧用钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A310-A2-2002 STEEL FOR COLD FORMED COIL SPRINGS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A310-A1)《冷压成型盘簧用钢 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A310-A1上》.pdf

FORD WSD-M1A310-A3-2002 STEEL FOR COLD FORMED COIL SPRINGS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A310-A1)《冷压成型盘簧用钢 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A310-A1上》.pdf

FORD WSD-M1A310-A4-2002 STEEL FOR COLD FORMED COIL SPRINGS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A310-A1)《冷压成型盘簧用钢 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A310-A1上》.pdf

FORD WSD-M1A313-A1-2002 STEEL - AUSTENITIC VALVE WROUGHT TO BE USED WITH FORD WSS-M99P1111-A 《阀门用奥氏体锻造钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A313-A2-2002 STEEL - AUSTENITIC VALVE WROUGHT TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A313-A1)《阀门用奥氏体锻造钢 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A313-A1上》.pdf