NF C97-160-4 A1-1994 《NF EN 60094-4-1994的修改件4》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 86025-2-2010 Pipe clamps for shipboard use - Fastening clamps with bracket - Part 2 Type C without insert Type D with insert《船舶用管夹 带托架的紧固夹件 第2部分 不带插件C型和带插件D型》.pdf

DIN 86025-3-2010 Pipe clamps for shipboard use - Fastening clamps with bracket - Part 3 Inserts《船舶用管夹 带托架的固定夹件 第3部分 插件》.pdf

DIN 86026-1-2010 Pipe clamps for shipboard use - Part 1 Pipe clamps for pipes DN 8 to DN 1400《船舶用管夹 第1部分 DN8至DN1400规格管材用管夹》.pdf

DIN 86026-2-2010 Pipe clamps for shipboard use - Part 2 Inserts for pipe clamps《船舶用管夹 第2部分 管夹用衬垫》.pdf

DIN 86028-2013 Welding necks of CuNi10Fe1 6Mn Technical specifications《CuNi10Fe1 6Mn对焊 技术规范》.pdf

DIN 86038-1-2000 Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 1 Lapped pipe ends DN 32 to DN 125《船舶与海上技术 活动法兰和超轻型搭接管端 第1部：DN32－DN125的搭接管.pdf

DIN 86038-2-2000 Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 2 Loose flanges DN 32 to DN 50 up to PN 25 DN 65 to DN 125 up to PN 10《船舶与.pdf

DIN 86038-3-2000 Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 3 Lapped pipe ends for but welding DN 32 to DN 125《船舶与海上技术 活动法兰和和超轻型搭接管端 第.pdf

DIN 86039-2000 Ships and marine technology - Flat gaskets for flange connections extra light duty DN 32 to DN 50 up to PN 25 DN 65 to DN 125 up to PN 10《船舶与海上技术 超轻型DN32-DN50(最大到PN2.pdf