FORD nut焊

1, Ford Global Technologies, Inc. WELD-THROUGH ABILITY OF PRIMERS AND SEALERS Application This method is used to determine the weld-through ability of

FORD nut焊Tag内容描述:

1、1, Ford Global Technologies, Inc. WELDTHROUGH ABILITY OF PRIMERS AND SEALERS Application This method is used to determin。

2、 05 21 Activated H. Kon, B. Curtiss Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1。

3、and retyped W. Scholz 1975 01 09 Released SMET0859 TP WP 3948a Page 1 of 7 SEALER, WELDABLE, EXPANDING, HEAT CURING SKM4。

4、09, Ford Global Technologies, LLC Page 1 of 3 ALUMINUM ALLOY, EXTRUSION, HIGH STRENGTH, WELDABLE WSSM2A164A1 JAGUAR LAND。

5、bhanath 1975 10 15 AF1600040 Released Was XFM2LX31 Printed copies are uncontrolled Page 1 of 3 Copyright 2002, Ford Glob。

6、 3.0 inserted; 3.1, 3.9 and 4 deleted 1986 07 31 Released CEQ2624770 K. A. Gribble Controlled document at www.MATS.ford。

7、CDR1WN1825191 Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 5 SEALER, ELASTOME。

8、 Updated L. Rumao 1988 10 31 CF43RD107002201 Released J. Huebner Printed copies are uncontrolled Page 1 of 2 Copyright 2。

9、LLC. Page 1 of 1 Revision: 2016 xx xx Updated Material and Performance Standard HEXAGON FLANGE NUT CONICAL WASHER ASSEMB。

10、Description WELD NUT HEXAGON FLANGE PROOF LOAD 10 CAPABILITY CATEGORY 250.020 FOREWORD: This standard was released origi。

11、LLC. Page 1 of 1 HEXAGON FLANGE NUT CONICAL WASHER ASSEMBLY PREVAILING TORQUE TYPE ALL METAL PC 10 THREAD TYPE 6H CATEGO。

12、009, Ford Global Technologies, LLC Page 1 of 9 ADHESIVE, WELDABLE, EXPANDABLE, THERMAL CURE, WSSM2G411A STRUCTURAL, STEE。

13、opyright 2000, Ford Global Technologies, Inc. WELDING ACCEPTANCE TEST FOR WELD THROUGH SEALERS Application This procedur。

14、1 Released D.A. Ruona Printed copies are uncontrolled Page 1 of 3 Copyright 2002, Ford Global Technologies, Inc. WINDLAC。

15、LLC. Page 1 of 1 Revision: 2016 xx xx Update Material and Performance Standard. HEXAGON FLANGE NUT CONICAL WASHER ASSEMB。

16、r M14 WELD NUT HEXAGON FLANGE PROOF LOAD 10 CAPABILITY CATEGORY 250.020 FOREWORD: This standard was released originally 。

17、and Washer Assemblies 1. SCOPE. This standard specifies the dimensional and performance requirements for nut and washer 。

18、lgas torches e,mployed in operations such as welding, brazing and heating. A torch to be considered a Gas Saver Type und。

19、 of 3 Copyright 2016, Ford Global Technologies, Inc. 1. SCOPE This standard gives the general and dimensional requiremen。

20、 and lubricant free. The dimensions must be as specified in WZ 100. The faces must be flat and parallel within a toleran。

【FORD nut焊】相关PDF文档
标签 > FORD nut焊[编号:331107]

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1