NF C97-412-1998 Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part 2 FM radio tuners 《家用高保真声频设备和系统 性能规定和测量方法 第2部分 FM无线电调谐.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4580-1992 四齿立铣刀用槽铣刀.D=40～75mm.pdf

HB 4581-1992 四齿立铣刀槽铣刀用样板和校对样板.检测HB 4580-92槽铣刀用.pdf

HB 4582-1992 六齿立铣刀用槽铣刀.D=56～80mm.pdf

HB 4583-1992 六齿立铣刀槽铣刀用样板和校对样板.检测HB 4582-92槽铣刀用.pdf

HB 4584-1992 八齿立铣刀用槽铣刀.D=75～90mm.pdf

HB 4585-1992 八齿立铣刀槽铣刀用样板和校对样板.检测HB 4584-92槽铣刀用.pdf

HB 4587-1992 加工轻合金二齿立铣刀用槽铣刀.D=30～75mm.pdf

HB 4588-1992 加工轻合金二齿立铣刀槽铣刀用样板和校对样板.检测HB 4587-92槽铣刀用.pdf

HB 4589-1992 加工轻合金二齿立铣刀用偏背刀.D=56～63mm.pdf