NF D21-601-1998 Materials and articles in contact with foodstuffs Non-metallic tableware Terminology 《与食品接触的材料和器具 非金属餐具 术语》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 19075-1980 Hexagon throw-away (indexable) carbide shims with 80 included angle Design and dimensions《可转位的多面的成80角六面形硬质合金支承刀片 结构及尺寸》.pdf

GOST 19076-1980 Square throw-away (indexable) carbide shims Design and dimensions《可转位的方形的多面的硬质合金支承刀片 结构及尺寸》.pdf

GOST 19077-1980 Square throw-away (indexable) carbide shims with end-clearance angle Design and dimensions《可转位的带后角方形的多面硬质合金支承刀片 结构及尺寸》.pdf

GOST 19078-1980 Rhombic throw-away (indexable) carbide shims with 80 included angle Design and dimensions《可转位多面带80的菱形硬质合金支承刀片 结构及尺寸》.pdf

GOST 19079-1980 Parallelogram throw-away (indexable) carbide shims Design and dimensions《可转位多面的平行四边形的硬质合金支承刀片 结构及尺寸》.pdf

GOST 19080-1980 Pentagon throw-away (indexable) carbide shims Design and dimensions《可转位多面的五棱形的硬质合金支承刀片 结构及尺寸》.pdf

GOST 19081-1980 Hexagon throw-away (indexable) carbide shims Design and dimensions《可转位多面的六棱形的硬质合金支承刀片 结构及尺寸》.pdf

GOST 19083-1980 Round throw-away (indexable) carbide shims Design and dimensions《可转位多面的圆形的硬质合金支承刀片 结构及尺寸》.pdf

GOST 19084-1980 Triangular throw-away (indexable) carbide chip breakers Design and dimensions《可转位多面的三棱形硬质合金断屑器 结构及尺寸》.pdf