NF E29-761-1988 Gas cylinders Hydraulic bursting test 《气瓶 液压爆裂试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M3H104-A4-2015 CARPET POLYESTER DILOUR NEEDLED MOLDABLE - LATEX PRECOAT POLYETHYLENE AND EVA BACKCOATED TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M3H104-A3).pdf

FORD WSS-M3H104-A5-2008 CARPET POLYPROPYLENE DILOUR NEEDLED - LATEX BACKCOATED LDPE EXTRUSION BACKED - TO BE USED WITH FORD WSS-M99P1111-A 《低密度聚乙烯(LDPE)挤压料背衬、乳胶背涂的DILOUR针刺聚丙烯(PP).pdf

FORD WSS-M3H104-A7-2014 CARPET POLYESTER NON WOVEN DILOUR POLYETHYLENE BACKED MOLDABLE 240 G M2 (7 OZ) NOMINAL FACE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3H105-A10-2008 CARPET POLYESTER FLAT NEEDLED LATEX BACKCOATED - TO BE USED WITH FORD WSS-M99P1111-A 《乳胶背涂的聚酯扁平针刺地毯 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M15P32-C］》.pdf

FORD WSS-M3H105-A11-2002 CARPET POLYESTER FLAT NEEDLED HEAT ACTIVATED WITH POLYETHYLENE BACKING TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯背衬的热活化型扁平针刺聚酯地毯 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSS-M3H105-A14-2010 CARPET POLYESTER FLAT NEEDLED HEAT ACTIVATED BINDER FUSED BACK TO BE USED WITH FORD WSS-M99P1111-A 《背面熔凝热激活粘合剂的聚酯扁平针刺地毯 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M3H105-A14-2017 CARPET POLO PATTERN POLYESTER NON WOVEN RANDOM VELOUR NEEDLED POLYETHYLENE MOLDABLE BACKING 305 g m2 (9 oz) TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3H105-A4-1995 CARPET POLO PATTERN 100 % RECYCLED POLYESTER FIBER FLAT NEEDLED NON-BACKCOATED (REPLACES ESB-M3H34-D ESB-M3H56-A2)《背面聚丙烯(PP)涂层的纺编衬底、扁平针刺100%再生聚酯纤维的POLO图案地毯 .pdf

FORD WSS-M3H105-A4-2015 CARPET POLO PATTERN 100% RECYCLED POLYESTER FIBER FLAT NEEDLED NON-BACKED 216 g m2 (6 4 oz) MIN TO BE USED WITH FORD WSS-M99P1111-A .pdf