NF E60-133-2-1996 Test conditions for box type vertical drilling machines Testing of the accuracy Part 2 pratical test 《箱型立式钻床的试验条件 精确度试验 第2部分 实用试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6894-2003 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine《直喷式涡轮增压汽车柴油发动机中机油透气阻力评价的标准试验方法》.pdf

ASTM D6894-2008 402 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine.pdf

ASTM D6894-2010 6250 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine《直接喷射式涡轮增压汽车柴油发动机用机油的抗混气性能评价的.pdf

ASTM D6894-2011 1250 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine《评估在直接注射涡轮增压汽车柴油机中发动机油的通气阻力的标.pdf

ASTM D6894-2013 red 3125 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine《评估直喷式涡轮增压汽车柴油发动机中机油透气阻力的.pdf

ASTM D6895-2006 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100&176 C《100℃时重型柴油机排放油的旋转粘度用标准试验方法》.pdf

ASTM D6895-2006(2012) 8125 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100° C《100摄氏度下重型柴油放油孔转动粘性的标准试验方法》.pdf

ASTM D6895-2017 red 2156 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100&x2009 &xb0 C《100℃时重型柴油机排放油的旋转粘度用标准试验方法》.pdf

ASTM D6896-2003(2007) 895 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature《低温下废机油的屈服应力和表观粘度测定的标准试验方法》.pdf