NF E66-512-1989 Tool life testing in milling Part 2 end milling 《铣刀寿命试验 第2部分 端铣削加工》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2291-2003 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites《玻璃纤维树脂复合物用环形试样制作的标准实施规范》.pdf

ASTM D2291-2009 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites《玻璃纤维树脂复合物用环形试样制作的标准实施规范》.pdf

ASTM D2293-1996(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)《用压力荷载法测定金属之间胶粘剂蠕变性能的标准试验方法》.pdf

ASTM D2293-1996(2008) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)《用压缩负荷法测定受剪胶粘剂蠕变性能的试验方法(金属之间)》.pdf

ASTM D2293-1996(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)《采用压缩载荷 (金属对金属) 测定剪切胶粘剂蠕变性能的标准试验方法》.pdf

ASTM D2294-1996(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)《用拉力负荷法测定金属之间胶粘剂蠕变性能的标准试验方法》.pdf

ASTM D2294-1996(2008) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)《用拉力负荷法测定金属之间胶粘剂蠕变性能的标准试验方法》.pdf

ASTM D2294-1996(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)《采用拉向载荷 (金属对金属) 测定剪切胶粘剂蠕变性能的标准试验方法》.pdf

ASTM D2295-1996(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)《高温下用拉力负荷法测定金属之间胶粘剂剪切强度的试验方法》.pdf