NF L22-412-1973 Hexagon reduced nuts Sim thread (rech ) 《国际单位制螺纹轻六角螺母》.pdf

相关资源

JIS Z8203-2000 国际单位制(SI)及其组合形式和某些其它单位的使用推荐规程 (如无法正确阅读Foxit Reader打开).pdf

GB 3100-1993 国际单位制及其应用.pdf

GB T 9648-1988 国际单位制代码.pdf

STAS 9446-1985 USING OF MEASURE LEGAL UNITS OUTSIDE THE INTERNATIONAL SYSTEM OF UNITS《利用国际单位制以外的法定计量单位 》.pdf

STAS 10085 2-1986 MEASURE UNITS OUTSIDE INTERNATIONAL SYSTEM OF UNITS (SI) Conversion factors《国际单位制（SI）以外测量单位的换算系数 》.pdf

ASME B89 7 5-2006 Metrological Traceability of Dimensional Measurements to the SI Unit of Length《长度国际单位制尺寸测量的计量溯源(ASME 技术报告)》.pdf

CNS 10987-2007 International system of units《国际单位制(SI)》.pdf

GOST 20403-1975 Rubber Method for determination hardness in international units (30 to 100 IRHD)《橡胶 用国际单位制（3～100IRHD）的硬度测测定法》.pdf

ITU-T B 3 SPANISH-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)《国际单位制(SI)的使用》.pdf

ITU-T B 3-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)《国际单位制(SI)的使用》.pdf

猜你喜欢

ASTM A304-2005e2 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements《有顶端淬火硬性要求的碳钢及合金钢棒材的标准规范》.pdf

ASTM A304-2011 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements《碳钢和合金钢筋末端淬透性要求的标准规格》.pdf

ASTM A304-2016 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements《有末端淬火淬透性要求的合金钢棒材的标准规格》.pdf

ASTM A307-2007a Standard Specification for Carbon Steel Bolts and Studs 60 000 PSI Tensile Strength《抗拉强度为60000PSI的碳素钢螺栓和螺柱的标准规范》.pdf

ASTM A307-2007b Standard Specification for Carbon Steel Bolts and Studs 60 000 PSI Tensile Strength《抗拉强度为60000PSI的碳素钢螺栓和螺柱的标准规范》.pdf

ASTM A307-2010 Standard Specification for Carbon Steel Bolts and Studs 60 000 PSI Tensile Strength《抗拉强度为60000 PSI的碳素钢螺栓和螺柱的标准规格》.pdf

ASTM A307-2012 Standard Specification for Carbon Steel Bolts Studs and Threaded Rod 60&x2009 000 PSI Tensile Strength《抗拉强度为60000 PSI的碳钢螺栓、螺柱和螺杆的标准规格》.pdf

ASTM A307-2014 Standard Specification for Carbon Steel Bolts Studs and Threaded Rod 60000 PSI Tensile Strength《抗拉强度为60000 PSI的碳钢螺栓 螺柱和螺杆的标准规格》.pdf

ASTM A307-2014e1 Standard Specification for Carbon Steel Bolts Studs and Threaded Rod 60&x2009 000 PSI Tensile Strength《拉强度60000 PSI的碳素钢螺栓 螺柱和螺栓杆的标准规格》.pdf