NF L22-451-2000 Aircraft bolts and nuts - Nuts hexagonal slotted castellated normal height ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter 《飞机用螺栓和螺母 ISO M或.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5293-2008 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator.pdf

ASTM D5293-2008e1 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator.pdf

ASTM D5293-2009 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator.pdf

ASTM D5293-2010 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator《使用冷启动模拟器测定机油在-5℃、-35℃和176℃时的表观粘度的标准试验方法》.pdf

ASTM D5293-2010e1 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013 5 and &x2013 35&x00B0 C Using Cold-Cranking Simulator《使用冷启动模拟器测定机油表面粘度和x.pdf

ASTM D5293-2014 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &ndash 5° C and &ndash 35° C Using Cold-Cranking Simulator《使用冷起动模拟器对5℃至35℃之.pdf

ASTM D5295 D5295M-2014 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems《用水密材料粘结薄膜制备混凝土表面的标准指南》.pdf

ASTM D5295 D5295M-2018 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems《粘合(粘合)膜防水系统用混凝土表面制备的标准指南》.pdf

ASTM D5295-2000(2006) Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems《用水密材料粘结薄膜制备混凝土表面的标准指南》.pdf