NF L35-140-1954 Fork joints for control linkage Model with threaded end (rech ) 《操纵连杆用叉形接头 叉尾柄带螺纹的式样(rech )》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 16674-1996 六角法兰面螺栓 小系列.pdf

GB T 16675.1-1996 技术制图 简化表示法 第1部分;图样画法.pdf

GB T 16675.2-1996 技术制图 简化表示法 第2部分;尺寸注法.pdf

GB T 16676-1996 银行营业场所安全防范工程设计规范.pdf

GB T 16679-1996 信号与连接的代号.pdf

GB T 16681-1996 信息技术 开放系统中文界面规范.pdf

GB T 16682.1-1996 信息技术 国际标准化轮廓的框架和分类方法 第1部分;框架.pdf

GB T 16687-1996 信息处理系统 开放系统互连 联系控制服务元素协议规范.pdf

GB T 16688-1996 信息处理系统 开放系统互连 联系控制服务元素服务定义.pdf