NF L54-147-005-2008 Aerospace series - Connectors electrical circular medium and high contact density scoop-proof with bayonet coupling operating temperatures - 65 oC to 175 oC or eti.pdf

上传人:周芸 文档编号:1003200 上传时间:2019-03-18 格式:PDF 页数:19 大小:310.91KB
下载 相关 举报
NF L54-147-005-2008 Aerospace series - Connectors electrical circular medium and high contact density scoop-proof with bayonet coupling operating temperatures - 65 oC to 175 oC or eti.pdf_第1页
第1页 / 共19页
NF L54-147-005-2008 Aerospace series - Connectors electrical circular medium and high contact density scoop-proof with bayonet coupling operating temperatures - 65 oC to 175 oC or eti.pdf_第2页
第2页 / 共19页
NF L54-147-005-2008 Aerospace series - Connectors electrical circular medium and high contact density scoop-proof with bayonet coupling operating temperatures - 65 oC to 175 oC or eti.pdf_第3页
第3页 / 共19页
NF L54-147-005-2008 Aerospace series - Connectors electrical circular medium and high contact density scoop-proof with bayonet coupling operating temperatures - 65 oC to 175 oC or eti.pdf_第4页
第4页 / 共19页
NF L54-147-005-2008 Aerospace series - Connectors electrical circular medium and high contact density scoop-proof with bayonet coupling operating temperatures - 65 oC to 175 oC or eti.pdf_第5页
第5页 / 共19页
点击查看更多>>
资源描述

1、NF EN 3372-005janvier 2008Ce document est usage exclusif et non collectif des clients Saga Web.Toute mise en rseau, reproduction et rediffusion, sous quelque forme que ce soit,mme partielle, sont strictement interdites.This document is intended for the exclusive and non collective use of Saga Web cu

2、stomers.All network exploitation, reproduction and re-dissemination,even partial, whatever the form (hardcopy or other media), is strictly prohibited.Saga Web Pour SHANGHAI INTERNAT SCIENCE the date of manufacture (year, week); the manufacturers name or trade mark. 7 Technical specification Accordin

3、g to EN 3372-001. EN 3372-005:2007 (F)74.3 Matriau, traitement de surface Voir Tableau 3. 4.4 Caractristiques gnrales principales Selon lEN 3372-002. 4.5 Combinaisons possibles de fiches et dembases Selon lEN 3372-002. 5 Dsignation EXEMPLE Bloc descripteur Bloc didentitCONNECTEUR ELECTRIQUE, EMBASE

4、EN 3372 Y 1 18N35 M NNumro de la norme de base Classe (Voir Tableau 3) Embase collerette ronde fixe par soudure (voir lEN 3372-002) Taille de botier et arrangement des contacts (voir lEN 3372-002) Type de contact M Mle Polarisation (voir lEN 3372-002) NOTE Si ncessaire le code I9005 doit tre plac en

5、tre le bloc descripteur et le bloc didentit. Tableau 3 Classe de connecteurs Classe Description Y Embase hermtique, acier inoxydable passiv, contact fixe souder, tenue 48 h au brouillard salin, temprature maximale dutilisation 200 C continus 6 Marquage Sauf sil existe dautres exigences contractuelle

6、s spcifiques, le marquage doit comprendre : le bloc didentit comme dfini dans lArticle 5 ; la date de fabrication (anne, semaine) ; le nom ou la marque du fabricant. 7 Spcification technique Selon lEN 3372-001. BNAE Bureau de Normalisation de lAronautique et de lEspace Le BNAE est lassociation, rgie

7、 par la loi de 1901, responsable de la prparation des normes internationales, europennes et nationales pour les secteurs Aronautique et Espace. Rvisions Les normes sont mises jour selon les amendements ou les rvisions. Dans un souci permanent damlioration de ses produits, le BNAE serait reconnaissan

8、t envers tout utilisateur qui linformerait de toute ambigut ou inexactitude rencontre dans une norme. Le BNAE offre galement un service de mise jour de rfrentiel normatif. Achats de normes Les commandes de documents normatifs doivent tre adresses au service commercial du BNAE : commercialbnae.asso.f

9、r Tel : +33 (0)1 47 65 70 21 Fax : +33 (0)1 47 65 70 20 Informations gnrales Le BNAE met disposition des informations sur les normes internationales, europennes et nationales travers son site Internet www.bnae.asso.fr . Copyright Les documents cds sont couverts par un copyright et ne peuvent tre rep

10、roduits sans autorisation du BNAE. Pour les documents au format papier, le copyright interdit leur reproduction. Pour les documents au format lectronique (pdf), le BNAE autorise imprimer et conserver un SEUL exemplaire. Par dfaut, la licence de la norme “pdf“ est de type monoposte spcifique au poste

11、 de travail du client.La diffusion des fins collectives, y compris aux autres membres du personnel du client, ainsi que la reproduction du document sur tout autre support, tels que plusieurs postes de travail ou serveur, sont interdites. Pour obtenir les conditions de vente dune licence rseau, veuil

12、lez contacter notre service commercial. BNAE Bureau de Normalisation de lAronautique et de lEspace BNAE is the association governed by the law of 1901 responsible for preparing the international, European and national standards for the sectors of Aeronautics and Space. Revisions Standards are update

13、d by amendments or revisions. It is the constant aim of BNAE to improve the quality of its products, i.e. BNAE would be grateful to be informed of any inaccuracy or ambiguity encountered while using the standard. BNAE also supplies an individual updating service. Purchase of standards Orders for sta

14、ndards are to be addressed to the sales department : commercialbnae.asso.fr Tel : +33 (0)1 47 65 70 21 Fax : +33 (0)1 47 65 70 20 General Information BNAE supplies information on international, European and national standards through its web site www.bnae.asso.fr . Copyright Documents released are c

15、overed by a copyright and cannot be reproduced without prior WRITTEN permission from BNAE. Documents in paper format are protected by a Copyright, their reproduction is forbidden. For documents in electronic format (pdf), BNAE gives permission to print out only ONE copy. The licence of a pdf standar

16、d is issued on a single-user basis specific to the customers workstation. Distribution for collective purposes, including to customers other staff members, as well as document reproduction on any other support, such as several workstations or a server are prohibited.To obtain the sales conditions of a network licence, please contact our sales department.

展开阅读全文
相关资源
猜你喜欢
  • FORD WSS-M4D961-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS EXTERIOR   TO B.pdf FORD WSS-M4D961-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS EXTERIOR TO B.pdf
  • FORD WSS-M4D961-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE FOR MOLDED-IN-COLOR AND FULLY-PAINTED APPLICATIONS EXTERIOR  .pdf FORD WSS-M4D961-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE FOR MOLDED-IN-COLOR AND FULLY-PAINTED APPLICATIONS EXTERIOR .pdf
  • FORD WSS-M4D961-A4-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE MOLD-IN-COLOR AND PARTIALLY PAINTED EXTERIOR  TO .pdf FORD WSS-M4D961-A4-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE MOLD-IN-COLOR AND PARTIALLY PAINTED EXTERIOR TO .pdf
  • FORD WSS-M4D961-A5-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL HIGH MELT FLOW LOW CLTE FULLY PAINTED EXTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《汽车外部用完全涂漆低线热胀系数、高.pdf FORD WSS-M4D961-A5-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL HIGH MELT FLOW LOW CLTE FULLY PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用完全涂漆低线热胀系数、高.pdf
  • FORD WSS-M4D962-A-2011 THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND 20% GLASS FIBER REINFORCED  TO BE USED WITH FORD WSS-M99P1111-A  《20%玻璃纤维增强热塑性聚酯弹性体模塑材料  与福特WSS-M99P1111.pdf FORD WSS-M4D962-A-2011 THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND 20% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维增强热塑性聚酯弹性体模塑材料 与福特WSS-M99P1111.pdf
  • FORD WSS-M4D963-A1-2011 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《内部热塑性弹性体模塑材料  与福特WSS-M99P1111-A  一起使用》.pdf FORD WSS-M4D963-A1-2011 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部热塑性弹性体模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf
  • FORD WSS-M4D964-A3-2011 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《热塑性弹性体模塑材料  与福特WSS-M99P1111-A  一起使用》.pdf FORD WSS-M4D964-A3-2011 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性弹性体模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf
  • FORD WSS-M4D966-A-2010 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND (TEEE + PBT) INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《汽车内部用热塑性弹性体成型料(TEEE)+聚对苯二甲酸丁二醇酯(PBT)  与标准FORD WSS-M99.pdf FORD WSS-M4D966-A-2010 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND (TEEE + PBT) INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用热塑性弹性体成型料(TEEE)+聚对苯二甲酸丁二醇酯(PBT) 与标准FORD WSS-M99.pdf
  • FORD WSS-M4D967-A1-2010 POLYKETONE (PK) GENERAL PURPOSE INJECTION MOLDING GRADE  TO BE USED WITH FORD WSS-M99P1111-A  《通用注塑级聚酮(PK)  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSS-M4D967-A1-2010 POLYKETONE (PK) GENERAL PURPOSE INJECTION MOLDING GRADE TO BE USED WITH FORD WSS-M99P1111-A 《通用注塑级聚酮(PK) 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1