NF P94-151-1993 Soil investigation and testing Isolated pile test under static transversal load 《土壤 调查与试验 静力横向负载下隔离桩荷载试验》.pdf

相关资源

DB11 T 927-2012 森林土壤调查技术规程.pdf

TD T 1043.1-2013 暗管改良盐碱地技术规程 第1部分土壤调查.pdf

TD T 1043.1-2013 暗管改良盐碱地技术规程 第1部分 ：土壤调查.pdf

LY T 2250-2014 森林土壤调查技术规程.pdf

GB T 36393-2018 土壤质量 自然、近自然及耕作土壤调查程序指南.pdf

ASTM D1452-2007a Standard Practice for Soil Investigation and Sampling by Auger Borings《用螺旋钻孔法对土壤调查和取样的标准实施规程》.pdf

ITU-T L 39 SPANISH-2000 Investigation of the soil before using trenchless techniques《使用不开沟技术前的土壤调查 系列L 施工安装和电缆以及其它外部线缆元件的保护 6号研究组》.pdf

DIN 18135-2012 Soil - Investigation and testing - Oedometer consolidation test《土壤 调查和试验 膨胀剂固结试验》.pdf

DIN 18128-2002 Soil - Investigation and testing - Determination of ignition loss《土壤 调查和检测 灼烧损失测定》.pdf

DIN 18122-2-2000 Soil - investigation and testing - Part 2 Determination of the shrinkage limit《土壤 调查和试验 第2部分 收缩极值测定》.pdf

猜你喜欢

FORD WSK-M4D648-A3-2015 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D649-A-2008 POLYETHYLENE (PE) FOAM CHEMICALLY CROSSLINKED CLOSED CELL 30 kg m3 TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯(PE)泡沫化学交联密闭槽 30 kg m ( 供与FORD WSS-M99P1111-A一起使.pdf

FORD WSK-M4D651-A2-2009 POLYPROPYLENE (PP) COPOLYMER 10 % MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%矿物材料填充的聚丙烯（PP）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSK-M4D653-A-2005 POLYAMIDE (PA) 66 HEAT STABILIZED 20% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用受热稳定、20%玻璃纤维增强的聚酰胺66成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSK-M4D654-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS SPHERE REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D654-A2)《40%玻璃珠增强的受热稳定的聚酰胺66 与标准FORD WSS-M99P.pdf

FORD WSK-M4D654-A2-2012 POLYAMIDE 66 (PA66) HEAT STABILIZED 40% GLASS SPHERE REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D656-A-2008 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《耐高热 耐高冲击强度丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FO.pdf

FORD WSK-M4D659-A-2014 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND RECYCLED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D660-A-2006 POLYPROPYLENE (PP) COPOLYMER COLOR PIGMENTED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用26%矿物填充的着色型聚丙烯（PP）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 使用WSS.pdf