NF Q03-034-1968 Paper and board tests Corrugated board Determination of dynamic puncture strength 《纸张和纸板试验 瓦楞纸板 耐动态穿孔强度测定》.pdf

相关资源

JIS Z 1516-2003 外包装用瓦楞纸板.pdf

BB T 0022-2004 瓦楞纸板输送带.pdf

JB T 11015-2010 印刷机械 瓦楞纸板卧式平压模切机.pdf

JB T 7548-2014 单面瓦楞纸板生产线.pdf

HG T 4009-2008 瓦楞纸板印刷用柔性树脂版.pdf

JB T 11465-2013 印刷机械 瓦楞纸板印刷开槽模切机.pdf

JB T 7548-1994 单面瓦楞纸板生产线.pdf

JB T 53227-1999 单面瓦楞纸板生产线 产品质量分等（内部使用）.pdf

QB T 2498-2000 瓦楞纸板生产线.pdf

GB T 17497.3-2012 柔性版装潢印刷品.第3部分：瓦楞纸板类.pdf

猜你喜欢

NASA NACA-TN-3583-1955 Charts of boundary-layer mass flow and momentum for inlet performance analysis mach number range 0 2 to 5 0《当马赫数为0 2至5 0时 进气道性能分析边界层质量流和力矩的图表》.pdf

NASA NACA-TN-3607-1956 Effect of thickness camber and thickness distribution on airfoil characteristics at Mach numbers up to 1 0《当马赫数为1 0时 厚度 弧形和厚度分布对机翼特性的影响》.pdf

NASA NACA-TN-3615-1956 An experimental investigation of the scale relations for the impinging water spray generated by a planing surface《平面产生的碰撞喷水数量关系的实验性研究》.pdf

NASA NACA-TN-3663-1956 Discharge coefficients for combustor-liner air-entry holes《燃烧器衬垫进气孔的流量系数》.pdf

NASA NACA-TN-3669-1956 Perforated sheets as a porous material for distributed suction and injection《对于分布式抽吸和注射的作为多孔材料的冲孔薄板》.pdf

NASA NACA-TN-3671-1956 Wind-tunnel investigation of the effect of clipping the tips of triangular wings of different thickness camber and aspect ratio - transonic bump method《使用跨音速.pdf

NASA NACA-TN-3693-1956 Preliminary investigation of the effectiveness of a sliding flap in deflecting a propeller slipstream downward for vertical take-off《对于垂直起飞将螺旋桨滑流偏转向下滑行襟翼有效性的.pdf

NASA NACA-TN-3696-1956 A study of the high-speed performance characteristics of 90 degrees bends in circular ducts《圆形风管内90弯曲高速性能特性的研究》.pdf

NASA NACA-TN-3782-1957 Handbook of structural stability part II buckling of composite elements《结构稳定性手册第II部分 复合装置的屈曲》.pdf