NF R41-101-2003 Commercial road vehicles - Mechanical connections between towing vehicles and trailers - Coupling devices for toroidal drawbar eye of 42 mm x 68 mm 《商用道路车辆 牵引车和拖车之间.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D701-A-2005 POLYAMIDE (PA) 12 FLEXIBLE HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《柔性、受热稳定的聚酰胺12模塑和挤塑成型料 与标准FORD WSS-M99P1111-.pdf

FORD WSK-M4D702-A-2012 ACETAL (POM) COPOLYMER MINERAL OIL IMPREGNATED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《乙缩醛(POM)共聚物 矿物油浸渍的模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D703-A-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED 33 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D704-A1-2010 POLYAMIDE (PA) 66 40 % MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%矿物填充的聚酰胺66（PA66）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D704-A2-2010 POLYAMIDE 66 (PA66) 40% MINERAL FILLED IMPROVED IMPACT STRENGTH MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%矿物填充的高抗冲强度的聚酰胺66(PA66)成型料 与标准FOR.pdf

FORD WSK-M4D704-A3-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 40% MINERAL FILLED REDUCED MOISTURE ABSORPTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D704-A1)《.pdf

FORD WSK-M4D705-A-2006 POLYAMIDE (PA) 66 IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D666-A)《冲击改性的聚酰胺66（PA66）成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSK-M4D706-A-2012 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D706-A2-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D666-A)《受热稳定、冲击改性的聚酰胺66(PA66)成型料 与标准F.pdf