NF S76-034-1998 Respiratory protective devices Powered filtering devices incorporating a helmet or a hood Requirements testing marking 《呼吸保护装置 装有头盔或护套的动力过滤装置 要求、试验和标记》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2561-1995(2005) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers《吹模制聚乙烯容器抗环境应力裂纹的标准试验方法》.pdf

ASTM D2561-2012 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers《吹模制聚乙烯容器抗环境应力裂纹的标准试验方法》.pdf

ASTM D2561-2017 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers《吹模制聚乙烯容器抗环境应力裂纹的标准试验方法》.pdf

ASTM D2562-1994(2002)e1 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics《增强热固塑料模制部件中可视缺陷的分类的标准操作规程》.pdf

ASTM D2562-1994(2008) Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics《增强热固塑料模制部件可见缺陷分类的标准实施规程》.pdf

ASTM D2562-1994(2015) Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics《增强热固塑料模制零件中可见缺陷分类的标准实施规程》.pdf

ASTM D2563-1994(2002)e1 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts《玻璃纤维增强塑料层压零件中可见缺陷分类的标准操作规程》.pdf

ASTM D2563-2008 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts《玻璃纤维增强塑料层压零件中可见缺陷分类的标准方法》.pdf

ASTM D2563-2008(2015) Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts《玻璃纤维增强塑料层压零件中可见缺陷分类的标准实施规程》.pdf