NF S90-520-1973 Medical and surgical equipment Components for artificial limbs and joints Detachable ankle joint with assembly hook 《外科医疗设备 假肢和假关节组件 连接挂钩的可拆卸踝骨》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CEPT T CD 01-11 E-1985 General Engineering Requirements for a Groupband Modem According to CCITT Recommendation V 36《根据CCITT建议V 36的集群调制解调器一般工程要求》.pdf

CEPT T CD 01-12 E-1983 Concerning the Specification of Engineering Requirements for Three Types of Plug-in DCE s Operating with a User Data Signalling Rate of 2 400 Bits s《有关三类在240.pdf

CEPT T CD 01-13 E-1986 Engineering Requirements for a Voice Plus Data System《语音和数据系统工程要求》.pdf

CEPT T CD 01-14 E-1986 Specification of Equipment Practice for Data Transmission Equipment《数据传输设备设备实践规范》.pdf

CEPT T CD 02-01 E-1986 Specification of Engineering Requirements for a Synchronous Digital Multiplexer Operating at 64 KBit s Using an 8 Bit (6+2) Envelope Structure《使用8 Bit(6+2)封套.pdf

CEPT T CD 02-02 E-1986 Specification of Engineering Requirements for a Synchronous Digital Multiplexer Operating at 64 KBit s Using a 10 Bit (8+2) Envelope Structure《使用10 Bit(8+2)封.pdf

CEPT T CD 02-04 E-1986 Engineering Requirements for a Synchronous Digital Multiplexer for Use with Non Envelope Structured Data《与无封套结构数据一起使用的的同步数字复用器工程要求》.pdf

CEPT T CD 02-04 E-1988 Engineering Requirements for a Synchronous Digital Multiplexer for Use with Non Envelope Structured Data (Revised in Edinburgh 1988)《与无封套结构数据一起使用的的同步数字复用器工程要.pdf

CEPT T CD 02-05 E-1986 Engineering Requirements for a Bus Interface to Be Used in Data Communication Equipment《要用于数据通信设备中的总线接口工程要求》.pdf