NF T47-503-1998 Rubber O-rings Materials requirements for the most common O-ring types 《橡胶O形密封圈 最通用型O形密封圈的材料要求》.pdf

相关资源

GB T 10708.3-2000 往复运动橡胶密封圈结构尺寸系列 第3部分 橡胶防尘密封圈.pdf

GB 7527-1987 燃油用O型橡胶密封圈胶料.pdf

QJ 1763.5-1989 橡胶模具典型结构 O型密封圈橡胶压模.pdf

QJ 1763.5-1989 橡胶模具典型结构O型密封圈橡胶压模.pdf

JB 1090-1991 J型真空用橡胶密封圈型式及尺寸.pdf

JB 1092-1991 O型真空用橡胶密封圈型式及尺寸.pdf

HB 5821-1983 包覆氟塑料“o”型橡胶密封圈技术条件.pdf

HB 5821-1983 包复氟塑料O型橡胶密封圈技术条件.pdf

JB 1091-1991 JO型和骨架型真空用橡胶密封圈 型式及尺寸.pdf

JB T 1092-1991 O型真空用橡胶密封圈型式及尺寸.pdf

猜你喜欢

FORD WB900 APPENDIX F-2013 Enhanced hexalobular internal driving feature for bolts and screws.pdf

FORD WB900-1996 GENERAL AND DIMENSIONAL REQUIREMENTS OF PAN HEAD RAISED COUNTERSUNK HEAD AND FLAT COUNTERSUNK HEAD MACHINE SCREWS AND MACHINE SCREW AND TOOTH WASHER ASSEMBLIES《盘头、高.pdf

FORD WB980-2007 PAINT CLEARING SCREWS - PERFORMANCE《无油漆螺钉 性能》.pdf

FORD WC120-2008 BOLT - HEXAGON FLANGE HEAD AND CONICAL WASHER PILOT《导正的六角凸缘头和锥形垫圈螺栓》.pdf

FORD WC121-2008 BOLT - HEXAGON FLANGE HEAD AND CONICAL WASHER PILOT《导正的六角凸缘头和锥形垫圈螺栓》.pdf

FORD WC130-2000 BOLT & WASHER - HEXAGON HEAD NP PILOT《带导正点的六角头螺栓和垫圈》.pdf

FORD WC900-2004 GENERAL SPECIFICATION FOR HEXAGON HEAD SCREW AND CONICAL SPRING WASHER ASSEMBLIES《六角头螺钉和锥形弹簧垫圈组件通用规范》.pdf

FORD WD 203-2013 TAPTITE 2000 THREAD ROLLING SCREW C SELECTIVELY HARDENED HEXAGON FLANGE HEAD CATEGORY 070 020.pdf

FORD WD 204-2013 TAPTITE 2000 SP THREAD ROLLING SCREW C NEUTRALLY HARDENED 8N HEXAGON FLANGE HEAD CATEGORY 070 020.pdf