NF T51-120-3-1995 Plastics and composites Determination of the bending fatigue properties Part 3 three-point bending test on unsecured test pieces 《塑料制品及复合材料 弯曲疲劳特性的测定 第3部分 不固定试件的.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 4548-15-2014 Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test for composite filter housings《内燃机全流式机油滤清器试验方法 复合滤清器.pdf

BS ISO 4548-5-2013 Methods of test for full-flow lubricating oil filters for internal combustion engines Test for cold start simulation and hydraulic pulse durability《内燃机全流式机油滤清器试验.pdf

BS ISO 4548-6-2012 Methods of test for full-flow lubricating oil filters for internal combustion engines Static burst pressure test《内燃机全流式机油滤清器试验方法 静压耐破度试验》.pdf

BS ISO 4548-7-2012 Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test《内燃机全流式机油滤清器试验方法 振动疲劳试验》.pdf

BS ISO 4548-9-2008 Methods of test for full-flow lubricating oil filters for internal combustion engines - Inlet and outlet anti-drain valve tests《内燃机用完全流通润滑油过滤器的试验方法 进口和出口止回阀试验》.pdf

BS ISO 4575-2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer《塑料 聚氯乙烯糊料 使用赛佛尔斯(Severs)流变仪测定表观粘度》.pdf

BS ISO 4582-2017 Plastics Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation natural weathering or laboratory radiatio.pdf

BS ISO 4587-2003 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies《粘合剂 刚性对刚性的粘接组件拉伸搭接剪切强度的测定》.pdf

BS ISO 4604-2011 Reinforcement fabrics Determination of conventional flexural stiffness Fixed-angle flexometer method《增强织物 普通弯曲硬挺度的测定 固定角曲率计法》.pdf