NF T51-810-1993 Plastics Determination of viscosity number and limiting viscosity number Part 6 methyl methacrylate polymers 《塑料制品 粘度数值和限定粘度数值的测定 第6部分 异丁烯酸甲脂聚合物》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 13397-3-1996 en Periodontal Curettes Dental Scalers and Excavators - Part 3 Dental Scalers H-Type《牙周刮匙 牙齿刮刀器和钻孔器 第3部分 牙齿刮刀器 H型 ISO 13397-3-1996》.pdf

EN ISO 13397-4-1997 en Periodontal Curettes Dental Scalers and Excavators - Part 4 Dental Excavators - Discoid-Type《牙周 刮匙 牙刮器和牙挖器 第4部分 牙挖器盘形》.pdf

EN ISO 13397-5-2015 en Dentistry - Periodontal curettes dental scalers and excavators - Part 5 Jacquette scalers《牙科 牙周刮匙 刮牙器和牙挖匙 第5部分 杰凯特刮牙器(ISO 13397 5 2015)》.pdf

EN ISO 13402-2000 en Surgical and Dental Hand Instruments - Determination of Resistance Against Autoclaving Corrosion and Thermal Exposure《外科和牙科手持器械耐蒸汽消毒 耐腐蚀和耐热性能的测定》.pdf

EN ISO 13408-1-2015 en Aseptic processing of health care products - Part 1 General requirements《保健品的无菌加工 第1部分 通用要求(ISO 13408-1 2008 including Amd 1 2013)》.pdf

EN ISO 13408-2-2011 en Aseptic processing of health care products - Part 2 Filtration《医疗保健产品的无菌加工 第2部分 过滤》.pdf

EN ISO 13408-3-2011 en Aseptic processing of health care products - Part 3 Lyophilization《医疗保健产品的无菌加工 第3部分 冻干法》.pdf

EN ISO 13408-4-2011 en Aseptic processing of health care products - Part 4 Clean-inplace technologies《医疗保健产品的无菌加工 第4部分 在位清洗工艺(ISO 13408-4-2005)》.pdf

EN ISO 13408-5-2011 en Aseptic processing of health care products - Part 5 Sterilization in place《医疗保健产品的无菌加工 第5部分 在位消毒(ISO 13408-5-2006)》.pdf