NF X11-635-1985 Size analysis-Representation of particle size distributions - Reference models《粒径分析 粒度分布代表 参考模型》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R 55069-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines Test methods Test cemented and wrapped joints《玻璃纤维增强热固性塑料管和管道部分 试验方法 粘结和包缠接头试验》.pdf

GOST R 55070-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines Methods to prove the leak tightness under short-term internal pressure《玻璃纤维增强热固性塑料管和管道部分 .pdf

GOST R 55071-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines Methods for determination of initial specific ring stiffness《玻璃纤维增强热固性塑料管和管道部分 特定初期环状物硬度的.pdf

GOST R 55072-2012 Fiberglass reinforced thermosetting plastic vessels Specifications《玻璃纤维增强热固塑料容器 规范》.pdf

GOST R 55073-2012 Resistance polymer composites for repairing industrial pipe-line Specifications《维修工业管线用耐性高分子复合材料 规范》.pdf

GOST R 55074-2012 Chemical resistance polymer composites for lining industrial tanks and vessels General specifications《作为工业储罐和容器内衬的耐化学性高分子复合材料通用规范》.pdf

GOST R 55075-2012 Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems Specifications《预期用于公共用水.pdf

GOST R 55076-2012 Fiberglass reinforced thermosetting plastic pipes and part of pipelines Methods for determination of time to failure under sustained internal pressure《玻璃纤维增强热固性塑料.pdf

GOST R 55077-2012 Fiberglass reinforced thermosetting plastic pipes and part of pipelines Methods for determination of the resistance to chemical attack for the inside of a section.pdf