NF Z15-075-1997 Identification card systems Device interface characteristics Classes of device interfaces 《识别卡系统 设备接口特性 设备接口等级》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 2671-1988 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Outline and Terms Edition P 1《航空航天系列液体和气体状态流动设计和建筑管道 大纲和术语》.pdf

AECMA PREN 2672-1989 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines Issue P 1《航空航天系列液体和气体状态流动设计和建筑管道刚性线条》.pdf

AECMA PREN 2673-1990 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Rigid Lines - Manufacture Edition P 1《航空航天系列液体和气体状态流动设计和建筑管道刚性线.pdf

AECMA PREN 2680-1998 Aerospace Series Nuts Anchor Self Locking Floating Self- Aligning Two Lug in Alloy Steel Cadmium Plated MoS2 Lubricated Classification 900 MPa (at Ambient Temp.pdf

AECMA PREN 2681-1998 Aerospace Series Aluminium Alloy 7010-T736 Die Forgings a Less Than or Equal to 150 mm Edition 2《航空航天系列.AL-P7010-T74铝合金手工膜锻件a小于或等于150mm.P1版》.pdf

AECMA PREN 2682-1998 Aerospace Series Aluminium Alloy 7010-T73652 Forgings 50 Less Than or Equal to a Less Than or Equal to 150 mm Edition 2《航空航天系列.7010-T73652 铝合金手工膜锻件50mm小于或等于a小于.pdf

AECMA PREN 2683-1998 Aerospace Series Aluminium Alloy 7010-T7651 Hand Forgings 80 Less Than or Equal to a Less Than or Equal to 160 mm Edition 2《航空和航天系列7010-T7651铝合金手工锻件80mm小于或等于a小.pdf

AECMA PREN 2684-1999 Aerospace Series Aluminium Alloy AL-P7010-T7651 Plate 6 mm Less Than a Less Than or Equal to 140 mm Edition P 1《航空和航天系列7010-T7651铝合金坯 6mm小于或等于a小于或等于140mm》.pdf

AECMA PREN 2685-1984 Aluminium Alloy 7010-T7652 Forgings 80 Less Than or Equal to a Less Than or Equal to 160 mm Aerospace Series Edition 1《航空和航天系列7010-T7651铝合金锻件80mm小于或等于a小于或等于160.pdf