NF Z85-431-1997 Transmission and Multiplexing (TM) Digital fixed point-to-point radio link equipment operating in the frequency range 24 25 GHz to 29 50 GHz 《传输和多路转换(TM) 在射频范围24 25.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS D ISO 15632-2012 Microbeam analysis－Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors《微光束分析 带半导体探测器的能量发散X射线分光仪的仪器规范》.pdf

KS D ISO 16220-2009 Magnesium and magnesium alloys－Magnesium alloy ingots and castings《镁和镁合金 镁合金铸锭和铸件》.pdf

KS D ISO 16592-2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method《微光束分析 电子探针显微分析 用校准曲线法测定.pdf

KS D ISO 16700-2013 Microbeam analysis－Scanning electron microscopy－Guidelines for calibrating image magnification《微电子束分析 扫描电子显微镜 校准图像放大指南》.pdf

KS D ISO 17053-2006 Steel and iron－Determination of oxygen－Infrared method after fusion under inert gas《钢铁 氧的测定 在惰性气体中熔化后的红外法》.pdf

KS D ISO 17577-2007 Steel－Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm《钢 厚度≥6mm的扁平钢产品的超声波试验》.pdf

KS D ISO 17615-2009 Aluminium and aluminium alloys－Alloyed ingots for remelting－Specifications《铝和铝合金 重熔用合金铸锭 规范》.pdf

KS D ISO 17834-2010 Thermal spraying－Coatings for protection against corrosion and oxidation at elevated temperatures《热喷涂 高温下抗腐蚀耐氧化保护涂层》.pdf

KS D ISO 1784-2001 Aluminium alloys－Determination of zinc－EDTA titrimetric method《铝合金 锌含量的测定 乙二胺四乙酸滴定法》.pdf