1、NFPA 140 Standard on Motion Picture and Television Production Studio Soundstages, Approved Production Facilities, and Production Locations Handbook 2013 140 NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471, USA An International Codes and Standards OrganizationNFPA, 1 Batterymarch Park, Quincy, MA 02
2、169-7471 An International Codes and Standards Organization NFPA 140 Standard on Motion Picture Annotated by Ron Cot, P .E. and Television Production Studio Soundstages, Approved Production Facilities, and Production Locations Handbook 2013 Copyright 2013National Fire Protection Association One Batte
3、rymarch Park Quincy, Massachusetts 02169-7471 All rights reserved. About this Handbook Edition This PDF contains the complete 2013 edition of NFPA 140, Standard on Motion Picture Production Soundstages, Approved Production Facilities, and Production Locations, annotated to assist the readers underst
4、anding of the standards language and the intent behind it. The annotations are not part of the NFPA Standard but provide a valuable commentary reflecting the views, explana- tions, and insights of authors and contributors selected by the NFPA based on their knowledge of and experience with the stand
5、ard. How to Navigate Between the Text of the Standard and the Annotations Navigate between code or standard text and annotations by using hyperlinked icons and code numbers. While in code or standard text, click on hyperlinked icon* to the left of the standard sec- tion to navigate to corresponding
6、annotations. Click on the hyperlinked annotative standard section number 1.1 to return to previous standard section. *Please note, only the sections featuring icons contain annotations. For longer blocks of annotations, it is recommended that you enable the back arrow functional- ity in Acrobats pag
7、e navigation menu, which will also allow you to return to the previous stan- dard section. How to Ensure You Have the Most Up-to-Date Version of the NFPA Standard The NFPA Standard, in the edition contained herein, is current as of the effective date des- ignated at the time the standard was issued
8、2013. This Edition does not, however, include errata, tentative interim amendments (TIAs), or formal interpretations (FIs) that may have been issued after the effective date. For all errata, TIAs, or FIs that may have been issued since the effective date, or for any new editions that may have supers
9、eded this edition, please visit the “Document Information pages” link for the relevant NFPA Standard located in the “Codes email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. IMPORTANT NOTICES AND DISCLAIMERS CONCERNING THE HANDBOOK EDITION Notice and
10、Disclaimer Concerning LiabilityNotice Concerning Interpretations Contained in the Annotations ISBN: 978-1455906826 Publication of this Edition is for the purpose of circulating information and opinion among those concerned for fire and electrical safety and related subjects. While every effort has b
11、een made to achieve a work of high quality, neither the NFPA nor the contributors to this Edition guarantee the accuracy or completeness of or assume any liability in connec- tion with the information and opinions contained in this dition. The NFPA and the contributors shall in no event be liable fo
12、r any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this Editio This Edition is published with the understanding that the NFPA and the co
13、ntribu- tors to this Edition are supplying information and opinion but are not attempting to render engineering or other professional services. If such services are required, the assistance of an appropriate professional should be sought. NFPA codes, standards, recommended practices, and guides (“NF
14、PA Documents”), includ- ing the NFPA Document that is the subject of this Edition, are made available for use subject to Important Notices and Disclaimers Concerning NFPA Documents, which are sepa- rately bookmarked and viewable in this Edition, and which can also be viewed at www. nfpa.org/disclaim
15、ers. NFPA codes, standards, recommended practices, and guides (“NFPA Documents”), including the NFPA Document that is the subject of this Edition are developed in accordance with the published procedures of the NFPA by technical committees comprised of volunteers drawn from a broad array of relevant
16、 interests. In this Edition the text of the NFPA Document is accompanied with annotations providing explanation and commentary on the meaning and intent of the Document. The annotations contained in this Edition are not a part of the NFPA Document and do not constitute Formal Interpretations of the
17、NFPA (which can be obtained only through requests processed by the responsible technical committees in accordance with the published procedures of the NFPA). The annotations, therefore, solely reflect the personal opinions of the author or other contributors and do not necessarily represent the offi
18、cial position of the NFPA or its technical committees.Copyright 2013 National Fire Protection Association . All Rights Reserved. NFPA 140 Standard on Motion Picture and Television Production Studio Soundstages, Approved Production Facilities, and Production Locations 2013 Edition This edition of NFP
19、A 140, Standard on Motion Picture and Television Production Studio Sound- stages, Approved Production Facilities, and Production Locations, was prepared by the Technical Committee on Motion Picture and Television Industry. It was issued by the Standards Council on November 27, 2012, with an effectiv
20、e date of December 17, 2012, and supersedes all previous editions. This edition of NFPA 140 was approved as an American National Standard on Decem- ber 17, 2012. Origin and Development of NFPA 140 The 1999 edition of NFPA 140, Standard on Motion Picture and Television Production Studio Soundstages a
21、nd Approved Production Facilities, was the first standard developed by the Technical Committee on Motion Picture and Television Industry. It closely paralleled a standard in effect in the state of California. The 2004 edition incorporated minor reformatting mandated by the Manual of Style for NFPA T
22、echnical Committee Documents. The 2008 edition was expanded to include requirements for production locations (i.e., “shooting on location”), and the title was changed to reflect that inclusion. Revisions to the 2013 edition include new requirements that soundstage audiences be provided with instruct
23、ions relative to location of exits and means that will be used to notify them in the event of fire or other emergency; use, mixing, dispensing, or storage of flam- mable and combustible liquids must be per fire code; hydrants, standpipes, and fire depart- ment connections must not be blocked, obstru
24、cted, or rendered inoperative; and grounding must by bonded per NFPA 70 , National Electrical Code , where power from both mobile generators and site electrical services are used to energize equipment. 1401 NFPA and National Fire Protection Association are registered trademarks of the National Fire
25、Protection Association, Quincy, Massachusetts 02169. Technical Committee on Motion Picture and Television Industry Paul M. Jordan, Chair NBC Universal Studios, CA U Hamid R. Bahadori, Hughes Associates, Inc., FL SE Robert Fash, Las Vegas Fire & Rescue, NV E Rep. Fire Code Committee Charles Joyce, Th
26、e RJA Group, Inc., NY SE Johnson K. Lee, Aon Risk Services, Inc., CA I Patrick Moynihan, American Broadcasting Company, NY U Kenneth R. Quick, Jr., City of Culver City Fire Department, CA E ChrisR.Re imer, Facilities Protection Systems, Inc., CA IM Hugh A. Rose, The Walt Disney Company, CA U Richard
27、 B. Schiehl, R. B. Schiehl & Associates, CA SE Alternates Matthew W. Donahue, The RJA Group, Inc., CA SE (Alt. to C. Joyce) John E. Kersten, NBC Universal City Studios, CA U (Alt. to P. M. Jordan) Ron Cot, NFPA Staff Liaison This list represents the membership at the time the Committee was balloted
28、on the final text of this edition. Since that time, changes in the membership may have occurred. A key to classifications is found at the back of the document. NOTE: Membership on a committee shall not in and of itself constitute an endorsement of the Association or any document developed by the com
29、mittee on which the member serves. Committee Scope: This Committee shall have primary responsibility for documents on the hazards associated with practices, processes, materials, and facilities associated with motion picture and television production. 1402 PRODUCTION STUDIO SOUNDSTAGES, APPROVED PRODUCTION FACILITIES, AND PRODUCTION LOCATIONS 2013 Edition
