NFPA 556-2016 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles (Effective Date 06 15 2015).pdf

上传人:appealoxygen216 文档编号:1008713 上传时间:2019-03-19 格式:PDF 页数:54 大小:2.47MB
下载 相关 举报
NFPA 556-2016 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles (Effective Date 06 15 2015).pdf_第1页
第1页 / 共54页
NFPA 556-2016 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles (Effective Date 06 15 2015).pdf_第2页
第2页 / 共54页
NFPA 556-2016 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles (Effective Date 06 15 2015).pdf_第3页
第3页 / 共54页
NFPA 556-2016 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles (Effective Date 06 15 2015).pdf_第4页
第4页 / 共54页
NFPA 556-2016 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles (Effective Date 06 15 2015).pdf_第5页
第5页 / 共54页
点击查看更多>>
资源描述

1、NFPA 556 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles 2016 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards OrganizationIMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTS NOTICE AND DISCLAIMER OF LIABILITY C

2、ONCERNING THE USE OF NFPA DOCUMENTS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings t

3、ogether volunteers representing varied viewpoints and interests to achieve consensus on re and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of an

4、y information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use

5、of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person o

6、r entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any

7、given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other statement of compl

8、iance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of the certier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that

9、 NFPA Standards may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then in effect. In o

10、rder to determine whether an NFPA Standard has been amended through the issuance of Tentative Interim Amendments or corrected by Errata, visit the Document Information Pages on NFPAs website. The Document Information Pages provide up-to-date, document specic information including any issued Tentativ

11、e Interim Amendments and Errata. To access the Document Information Page for a specic NFPA Standard, go to http:/www.nfpa.org/docinfo to choose from the list of NFPA Standards or use the search feature on the right to select the NFPA Standard number (e.g., NFPA 101). In addition to posting all exist

12、ing Tentative Interim Amendments and Errata, the Document Information Page also includes the option to sign-up for an “Alert” feature to receive an email notication when new updates and other information are posted regarding the document. ISBN: 978-145591179-0 (Print) ISBN: 978-145591216-2 (PDF)IMPO

13、RTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS ADDITIONAL NOTICES AND DISCLAIMERS Updating of NFPA Standards Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that these documents may be superseded at any time by the issuance of new edition

14、s or may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to de

15、termine whether a given document is the current edition and whether it has been amended through the issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire Codes Subscription Service, visit the NFPA website

16、 at www.nfpa.org, or contact the NFPA at the address listed below. Interpretations of NFPA Standards A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing the Development of NFPA Standards shall not be considered the ofcial position of NFPA or

17、any of its Committees and shall not be considered to be, nor be relied upon as, a Formal Interpretation. Patents The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Standard. The users of NFPA Standar

18、ds bear the sole responsibility for determining the validity of any such patent rights, as well as the risk of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Standards. NFPA adheres to the policy of the A

19、merican National Standards Institute (ANSI) regarding the inclusion of patents in American National Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy: NOTICE: The users attention is called to the possibility that compliance with an NFPA Standard may

20、require use of an invention covered by patent rights. NFPA takes no position as to the validity of any such patent rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has

21、 led a statement of willingness to grant licenses under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of such led statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the addres

22、s listed below. Law and Regulations Users of NFPA Standards should consult applicable federal, state, and local laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, an

23、d these documents may not be construed as doing so. Copyrights NFPA Standards are copyrighted. They are made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promo

24、tion of safe practices and methods. By making these documents available for use and adoption by public authorities and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Standards for regulatory purposes should be accomplished through adoption by reference

25、. The term “adoption by reference” means the citing of title, edition, and publishing information only. Any deletions, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents,

26、adopting authorities are requested to notify the NFPA (Attention: Secretary, Standards Council) in writing of such use. For technical assistance and questions concerning adoption of NFPA Standards, contact NFPA at the address below. For Further Information All questions or other communications relat

27、ing to NFPA Standards and all requests for information on NFPA procedures governing its codes and standards development process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA standards du

28、ring regular revision cycles, should be sent to NFPA headquarters, addressed to the attention of the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101; email: stds_adminnfpa.org For more information about NFPA, visit the NFPA website at www.nfpa.org. All N

29、FPA codes and standards can be viewed at no cost at www.nfpa.org/freeaccess.556-1 NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2015 National Fire Protection Association . All Rights Reserve

30、d. NFPA 556 Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles 2016 Edition This edition of NFPA 556, Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles, was prepared by the Technical Committee on Hazard and Risk of Contents and Furni

31、shings. It was issued by the Standards Council on May 26, 2015, with an effective date of June 15, 2015, and supersedes all previous editions. This edition of NFPA 556 was approved as an American National Standard on June 15, 2015. Origin and Development of NFPA 556 The 2011 edition was the rst for

32、this guide. Its development was prompted in part by re statistics associated with vehicles as well as car and van re research as documented by the National Highway Trafc Safety Administration. Those statistics and research prompted the committees opinion that the current method of evaluating vehicle

33、 materials is unsatisfactory. NFPA 556 identies major re safety concerns associated with passenger road vehicles and provides guidance on newer evaluation methods with the aim of decreasing the re hazard and re risk associated with such vehicles. In addition, NFPA 556 provides guidance and tools for

34、 those persons investigating methods to decrease the re hazard or re risk in passenger road vehicles and for a hazard-based assessment for the development of hazardous conditions from re involving passenger road vehicles. The 2016 edition contains new language for noncombustible material criteria an

35、d new language recognizing the school bus seat upholstery re block test. Table 10.1 has been revised to include test methods and tools for seat materials for school buses and additional evaluation options for windshields based upon ame spread or re resistance testing. Additional updates to terminolo

36、gy, denitions, and testing notations have been made throughout the document to reect industry standards and technology.METHODS FOR EVALUATING FIRE HAZARD TO OCCUPANTS OF PASSENGER ROAD VEHICLES 556-2 2016 Edition Technical Committee on Hazard and Risk of Contents and Furnishings Steven D. Wolin, Cha

37、ir Reliable Automatic Sprinkler Company, Inc., SC M Farid Alfawakhiri, American Iron and Steel Institute, IL M Craig L. Beyler, Hughes Associates/RJA Group, MD SE David A. Boverman, Greenacre, NSW, Australia E Elizabeth C. Buc, Fire & Materials Research Laboratory, LLC, MI RT David G. Bueche, Hoover

38、 Treated Wood Products, CO M Michael T. Burr, Safety Engineering Laboratories, Inc., MI RT Marcos Chaos, FM Global, MA I Cam Cope, Auto Fire and Safety Consultants, TX SE Alberto Cusimano, Alstom Power Inc., Switzerland M Gordon H. Damant, Inter-City Testing & Consulting Corp. of California, CA SE J

39、ason Daniels, Code Consultants, Inc., MO SE Marcelo M. Hirschler, GBH International, CA SE Xianxu Hu, Insurance Services Ofce, Inc., NJ I William E. Koffel, Koffel Associates, Inc., MD SE Sergei V. Levchik, Israel Chemicals Ltd. (ICL-IP), NY M Richard T. Long, Jr., Exponent, Inc., MD M Rep. Upholste

40、red Furniture Action Council Jeffrey Santrock, General Motors LLC, MI M Rep. Alliance of Automobile Manufacturers Dwayne E. Sloan, UL LLC, NC RT Peter J. Willse, XL Global Asset Protection Services, CT I Alternates Erik H. Anderson, Koffel Associates, Inc., MD SE (Alt. to W. E. Koffel) Richard J. Da

41、vis, FM Global, MA I (Alt. to M. Chaos) Timothy Earl, GBH International, MI SE (Alt. to M. M. Hirschler) William Randall Edwards, Alliance of Automobile Manufacturers, MI M (Alt. to J. Santrock) John A. Frank, XL Global Asset Protection Services, GA I (Alt. to P. J. Willse) Nestor R. Iwankiw, Hughes

42、 Associates/RJA Group, IL SE (Alt. to C. L. Beyler) Randall K. Laymon, UL LLC, IL RT (Alt. to D. E. Sloan) Jerry W. Wallace, Safety Engineering Laboratories, Inc., MI RT (Alt. to M. T. Burr) Shaohua Xia, Fire & Rescue New South Wales, E (Alt. to D. A. Boverman) Kristin Bigda, NFPA Staff Liaison This

43、 list represents the membership at the time the Committee was balloted on the nal text of this edition. Since that time, changes in the membership may have occurred. A key to classications is found at the back of the document. NOTE: Membership on a committee shall not in and of itself constitute an

44、endorsement of the Association or any document developed by the committee on which the member serves. Committee Scope: This Committee shall have primary responsibility for documents on re hazard calculation procedures for use by other Committees in writing provisions to control the re hazards of con

45、tents and furnishings. This Committee shall also provide guidance and recommendations to Committees in assessing the re hazard of contents and furnishings. It shall establish classication and rating systems, request the development and standardization of appropriate re tests, and identify and encour

46、age necessary research as it relates to the re hazards of contents and furnishings. It shall act in a liaison capacity between NFPA and the committees of other organizations with respect to the hazard of contents and furnishings.CONTENTS 556-3 2016 Edition Contents Chapter 1 Administration 556 4 1.1

47、 Scope. . 556 4 1.2 Purpose. . 556 4 1.3 Application. 556 4 1.4 Units and Formulas. 556 5 Chapter 2 Referenced Publications 556 5 2.1 General. 556 5 2.2 NFPA Publications. 556 5 2.3 Other Publications. . 556 5 2.4 References for Extracts in Advisory Sections. 556 7 Chapter 3 Denitions . 556 7 3.1 Ge

48、neral. 556 7 3.2 NFPA Denitions. 556 7 3.3 General Denitions. 556 8 Chapter 4 Types of Vehicles 556 9 4.1 General. 556 9 Chapter 5 General Description of Passenger Road Vehicle Fires and Background Information . 556 9 5.1 Fire Statistics. . 556 9 5.2 Materials Used in Passenger Road Vehicles. 556 11

49、 5.3 Current Prescriptive Testing. 556 12 5.4 Noncombustible Material. 556 12 5.5 Fire Performance Properties. . 556 13 5.6 Tenability Criteria. . 556 13 Chapter 6 Approach to Evaluating Passenger Road Vehicle Fire Hazard 556 13 6.1 General. 556 13 6.2 Basic Performance-Based Approach. . 556 13 6.3 Design Considerations. . 556 14 6.4 Regulatory Considerations. . 556 14 Chapter 7 Objectives and Design Criteria 556 14 7.1 Objectives. 556 14 7.2 Design Cri

展开阅读全文
相关资源
猜你喜欢
  • BS A 344-1999 Nuts anchor self-locking fixed single lug reduced series with counterbore with MJ threads classifications 1100 MPa (at ambient temperatures) 235 C 1100 MPa (at ambien.pdf BS A 344-1999 Nuts anchor self-locking fixed single lug reduced series with counterbore with MJ threads classifications 1100 MPa (at ambient temperatures) 235 C 1100 MPa (at ambien.pdf
  • BS A 345-1999 Nuts hexagonal self-locking with counterbore and captive washer with MJ threads classifications 1100 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperatu.pdf BS A 345-1999 Nuts hexagonal self-locking with counterbore and captive washer with MJ threads classifications 1100 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperatu.pdf
  • BS A 346-2000 UNJ threads - General requirements and limit dimensions《UNJ螺纹 一般要求和极限尺寸》.pdf BS A 346-2000 UNJ threads - General requirements and limit dimensions《UNJ螺纹 一般要求和极限尺寸》.pdf
  • BS A 351-2000 Rivets solid in nickel alloy - Procurement specification《镍合金实心铆钉 采购规范》.pdf BS A 351-2000 Rivets solid in nickel alloy - Procurement specification《镍合金实心铆钉 采购规范》.pdf
  • BS A 352-2000 Rivets solid in titanium or titanium alloy - Procurement specification《钛或钛合金的实心铆钉 采购规范》.pdf BS A 352-2000 Rivets solid in titanium or titanium alloy - Procurement specification《钛或钛合金的实心铆钉 采购规范》.pdf
  • BS A 353-2000 Inserts with self-locking floating nut with MJ threads in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套 尺寸》.pdf BS A 353-2000 Inserts with self-locking floating nut with MJ threads in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套 尺寸》.pdf
  • BS A 354-2000 Inserts self-locking with MJ threads closed type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的封闭式MJ螺纹的自锁衬套 尺寸》.pdf BS A 354-2000 Inserts self-locking with MJ threads closed type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的封闭式MJ螺纹的自锁衬套 尺寸》.pdf
  • BS A 355-2000 Inserts self-locking with MJ threads open type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的开放式MJ螺纹自锁衬套 尺寸》.pdf BS A 355-2000 Inserts self-locking with MJ threads open type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的开放式MJ螺纹自锁衬套 尺寸》.pdf
  • BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1