NORVEN 13-9-1963 《针对泡菜使用的芥末》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DS EN ISO 6413-1995 Technical drawings - Representation of splines and serrations《技术制图 花键和锯齿形花键联接的表示》.pdf

DS EN ISO 6414-1995 Technical drawings for glassware《玻璃器皿的技术制图》.pdf

DS EN ISO 6988-1995 Metallic and other non organic coatings - Sulfur dioxide test with general condensation of moisture《金属和其他非有机覆盖层 通常凝露条件下的二氧化硫腐蚀试验》.pdf

DS EN ISO 7384-1995 Corrosion tests in artificial atmosphere - General requirements《人工大气条件下的腐蚀试验 一般要求》.pdf

DS EN ISO 7441-1995 Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests《金属和合金腐蚀 室外接触腐蚀试验中双金属腐蚀的测定》.pdf

DS EN ISO 7487-1-1995 Information technology- Data interchange on 130 mm (5 25 in) flexible disk cartidges using modified frequency modulation recording at 7958 ftprad 1 9 tpmm (48.pdf

DS EN ISO 7721-2-1994 Countersunk flat head screws - Part 2 Penetration depth of cross recesses《平沉头螺钉 第2部分：十字槽穿透深度》.pdf

DS EN ISO 8401-1995 Metallic coatings - Review of methods of measurement of ductility《金属覆盖层 延展性测量方法综述》.pdf

DS EN ISO 8819-1995 Liquefied petroleum gases - Determination of hydrogen sulfide - Lead acetate method《液化石油气 硫化氢的测定 乙酸铅法》.pdf