NORVEN 55-31-1961 《通过快速方法对彩色纺织原料的硬度进行检测（通过清洗方法）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 02 1105 Zd-1986 《捷克国家标准02 1105精密螺丝，六角头》.pdf

CSN 02 1105-1961 Bright hexagon bolts with slot《带槽的光制六角形螺栓》.pdf

CSN 02 1115-1952 Forcing-off screws with pin《带栓螺栓》.pdf

CSN 02 1116-1952 Forcing-off screws with point《带尖角的螺栓》.pdf

CSN 02 1121-1962 Square head bolts with half dog point and rounded end《带半圆柱轴颈止端及圆端的方形头螺栓》.pdf

CSN 02 1122-1962 Square head bolt with collar and half dog point with rounded end《带项圈与圆端半尖端的方形头螺栓》.pdf

CSN 02 1124-1962 Bolts for T-slots《T型槽螺栓》.pdf

CSN 02 1128-1986 Cylindrical-head screws with holes in head《带头部孔的圆柱头螺钉》.pdf

CSN 02 1130-1986 Slotted pan head screws with small head《小头开槽盘头螺钉》.pdf