NS 1722-1978 Valves - Gate valves of leaded brass - Female threaded ends R 3 8 to R 3 - Threaded bonnet non-rising stem - Nominal pressure PN16 - Max temperature 90 degrees Celsius.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D385-A-2008 ABS SHEET EXTRUSION GRADE - VACUUM FORMABLE - INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯薄板 内部用挤出级 可真空成型(和FORD WSS-M99P1111-A一起使用(使用 FORD WSK.pdf

FORD ESB-M4D385-A2-2008 BS MOLDING COMPOUND - HIGH IMPACT TO BE USED WITH FORD WSS-M99P1111-A 《丁二烯-苯乙烯共聚物模塑料 耐冲击(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WSK-M4D827-A .pdf

FORD ESB-M4D4-A-2009 ACETATE - BUTYRATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《醋酸酯-丁酸酯成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D400-A-2009 LAMINATE RIGID POLYSTYRENE FOAM FILM - THERMOFORMABLE HEADLINING SUBSTRATE TO BE USED WITH FORD WSS-M99P1111-A 《可热成型的车顶内衬基底用刚性聚苯乙烯泡沫塑料 薄膜层压板 与标准FORD WSS-M.pdf

FORD ESB-M4D404-A-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER AND GLASS FIBER MODIFIED MOLDING COMPOUND INTERIOR GRADE COLOR PIGMENTED UV STABILIZED TO BE USED WITH FORD WSS-M99P1111-.pdf

FORD ESB-M4D411-B-2009 LAMINATE POLYVINYL CHLORIDE SKIN POLYVINYL CHLORIDE FOAM - POLYVINYL CHLORIDE SKIN - RIGID SUBSTRATE - FORMED TRIM ASSEMBLY - LOW FOG TO BE USED WITH FORD W.pdf

FORD ESB-M4D413-A2-2008 ABS - POLYCARBONATE MOLDING COMPOUND ELECTROPLATING ESB-M4D413-A2 AND PAINTING GRADE TO BE USED WITH FORD WSS-M99P1111-A 《ESB-M4D413-A2电镀和油漆级丙烯腈-丁二烯-苯乙烯共聚.pdf

FORD ESB-M4D436-A3-2010 POLYETHERIMIDE (PEI) 30% GLASS FIBER REINFORCED INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚醚酰亚胺（PEI）注塑成型料 与标准FORD WSS-M99.pdf

FORD ESB-M4D442-A-2010 POLYCARBONATE - POLYBUTYLENE TEREPHTHALATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯、聚对苯二甲酸丁二醇酯成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf