NS 3576-4-2005 Steel for the reinforcement of concrete - Dimensions and properties - Part 4 Welded fabric.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D912-A-2006 ACETAL (POM) HOMOPOLYMER 15 % PTFE AND SILICONE LUBRICATED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%聚四氟乙烯(PTFE)和硅树脂润滑的乙缩醛共聚物(POM)均聚物成型料 与标.pdf

FORD WSB-M4D914-A-2010 POLYCYCLOHEXYLENE DIMETHYLENE TEREPHTHALATE (PCT) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚(对苯二甲酸亚环已基-二亚.pdf

FORD WSB-M4D914-A2-2010 POLYCYCLOHEXYLENE DEMETHYLENE TEREPHTHALATE (PCT) 15% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的聚(对苯二甲酸亚环已基-二.pdf

FORD WSB-M4D918-A-2010 POLYPHENYLENE SULFIDE (PPS) 33% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基硫化物(PPS) 33%玻璃纤维增强模塑材料 与福特WSS-M99P1111-A .pdf

FORD WSB-M4D919-A-2010 POLYPROPYLENE (PP) COPOLYMER IMPACT MODIFIED 30% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%矿物填料填充的聚丙烯（PP）共聚物成型料 与标准FORD WSS-.pdf

FORD WSB-M4D921-A-2006 POLYBUTYLENE TEREPHTHALATE + POLYETHYLENE TEREPHTHALATE BLEND (PBT +PET) 30 % GLASS MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D922-A-2010 POLYCARBONATE (PC) 10% GLASS FIBER REINFORCED POST CONSUMER RECYCLATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯(PC) 10%玻璃纤维增强用后回收模塑材料 与福特.pdf

FORD WSB-M4D923-A-2008 POLYCARBONATE + ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P111-A 《聚碳酸酯+丙烯腈 丁二烯 苯乙烯混合物(PC+ABS)成型料.pdf

FORD WSB-M4D924-A-2012 POLYCARBONATE + ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) HIGH LOW TEMPERATURE IMPACT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf