NS 4105-1972 Series of sizes A through G - Theoretical basis.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 18464-1996 Hydraulic fluid power Hydraulic cylinders Acceptance rules and test methods《容积液压传动 液压缸 验收规则和试验方法》.pdf

GOST 18465-1973 Gauges for metric thread from 1 to 68 mm Required dimensions《1mm～68mm公制螺纹用的量规 执行尺寸》.pdf

GOST 18466-1973 Gauges for metric thread over 68 to 200 mm Required dimensions《68mm～200mm公制螺纹用量规 结构及尺寸》.pdf

GOST 18471-1983 Television video channel of broadcast television Channel parts and measuring signals《广播电视图象的传输通道 通道环节和测量信号》.pdf

GOST 18473-1988 Poultry farming Terms and definitions《养禽 术语和定义》.pdf

GOST 18475-1982 Aluminium and aluminium alloy cold-rolled tubes Specifications《铝及铝合金有轧制管及冷拉管 技术条件》.pdf

GOST 18477-1979 Universal containers Types basic parameters and dimensions《通用集装箱 型式 基本参数和尺寸》.pdf

GOST 18479-1973 Planer-type circular saws for sawing of wood Technical conditions《锯木材切片用圆锯 技术条件》.pdf

GOST 18480-1973 Relived woodworking cutters with rear teeth for rebating《加工凹缘和边缘用铲齿木工套式铣刀 结构及尺寸》.pdf