NS-EN 10034-1994 Structural steel I and H sections - Tolerances on shape and dimensions.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN ISO 8205-3-2013 Water-cooled secondary connection cables for resistance welding - Part 3 Test requirements (ISO 8205-3 2012) German version EN ISO 8205-3 2012《电阻焊接水冷二次接线连接电缆.pdf

DIN EN ISO 8222-2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222 2002) German version EN ISO 8.pdf

DIN EN ISO 8224-1-2011 Traveller irrigation machines - Part 1 Operational characteristics and laboratory and field test methods (ISO 8224-1 2003 AMD 1 2011) German version EN ISO 8.pdf

DIN EN ISO 8230-1-2009 Safety requirements for dry-cleaning machines - Part 1 Common safety requirements (ISO 8230-1 2008) English version of DIN EN ISO 8230-1 2009-05《干洗机的安全要求 第1部.pdf

DIN EN ISO 8230-2-2009 Safety requirements for dry-cleaning machines - Part 2 Machines using perchloroethylene (ISO 8230-2 2008) English version of DIN EN ISO 8230-2 2009-05《干洗机的安全.pdf

DIN EN ISO 8230-3-2009 Safety requirements for dry-cleaning machines - Part 3 Machines using combustible solvents (ISO 8230-3 2008) English version of DIN EN ISO 8230-3 2009-05《干洗机.pdf

DIN EN ISO 8249-2000 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249 2000) German version EN.pdf

DIN EN ISO 8251-2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251 2011) German version EN ISO 8251 2011《铝和铝合金的阳.pdf

DIN EN ISO 8253-1-2011 Acoustics - Audiometric test methods - Part 1 Pure-tone air and bone conduction audiometry (ISO 8253-1 2010) German version EN ISO 8253-1 2010《声学 听力测定试验方法 第1.pdf