ONORM EN 10232-1994 Metallic materials Tube (in full section) Bend test《金属材料 管（整节） 弯曲试验》.pdf

相关资源

JIS Z 2201-1998 中文版 金属材料拉伸试验.pdf

JIS Z 2201-1998 英文版 金属材料抗拉试验用试样.pdf

JIS Z 2242-2005 金属材料冲击试验方法.pdf

JIS Z 2254-2008 中文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 2254-2008 英文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 3422-1-2003 金属材料焊接程序规范及认可.焊接程序试验.第1部分钢的电弧焊及气焊和镍及镍合金的电弧焊.pdf

JIS Z3420-2003 金属材料焊接过程的规范及认可.总则 Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding.pdf

JIS G0564-1999 金属材料.平面应变断裂强度的测定.pdf

JIS H7503-2003 超塑变形金属材料孔穴体积百分率的测量方法.pdf

YB T 5293-2006 金属材料.顶锻试验方法.pdf

猜你喜欢

FORD WSK-M4G325-A4-2007 SEALER HEAT CURING PUMPABLE SPOT WELDABLE HIGH EXPANDING TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4G325-A1)《高膨胀型、可点焊、可泵送热固化密封剂 与标准FORD WSS-M99P.pdf

FORD WSK-M4G325-A5-2007 SEALER HEAT CURING PUMPABLE SPOT WELDABLE EXPANDING TO BE USED WITH FORD WSS-M99P1111-A 《高膨胀型、可点焊、可泵送热固化密封剂 与标准FORD WSS-M99P1111-A一起使用 列于标准WSK-M4G325-A1.pdf

FORD WSK-M4G325-A5-2016 SEALER HEAT CURING PUMPABLE SPOT WELDABLE MEDIUM EXPANDING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G325-A1).pdf

FORD WSK-M4G325-A5-2017 SEALER HEAT CURING PUMPABLE SPOT WELDABLE MEDIUM EXPANDING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G325-A1).pdf

FORD WSK-M4G325-A6-2010 SEALER HEAT CURING PUMPABLE SPOT WELDABLE LOW EXPANDING LOW VISCOSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G325-A1)《低粘度、低膨胀型、可点焊、可泵送热.pdf

FORD WSK-M4G326-A1-2014 SEALANT FLANGE ANAEROBIC FOR SCREEN PRINTING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4G328-A1-2014 SEALANT PRE-APPLIED THREAD NON-CURING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4G328-A2-2014 SEALANT PRE-APPLIED THREAD NON-CURING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G328-A1).pdf

FORD WSK-M4G328-A3-2014 SEALANT PRE-APPLIED THREAD NON-CURING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G328-A1).pdf