ONORM M 1113-1982 Technical surfaces methods of surjace analyzing Surjaces techniqu es methodes de essai des surfaces《技术曲面 表面分析方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R ISO 13405-1-2001 Prosthetics and orthotics Classification and description of prosthetic components Part 1 Classification of prosthetic components《修复学和矫正术 假体部件的分类和描述 第1部分 假体部.pdf

GOST R ISO 13405-2-2001 Prosthetics and orthotics Classification and description of prosthetic components Part 2 Description of lower-limb prosthetic components《修复学和矫正术 假体部件的分类和描述 .pdf

GOST R ISO 13405-3-2001 Prosthetics and orthotics Classification and description of prosthetic components Part 3 Description of upper-limb prosthetic components《修复学和矫正术 假体部件的分类和描述 .pdf

GOST R ISO 13408-1-2000 Aseptic processing of health care products Part 1 General reguirements《医疗卫生产品的无菌操作 第1部分 一般要求》.pdf

GOST R ISO 13408-2-2007 Aseptic processing of health care products Part 2 Filtration《医疗卫生产品的无菌操作 第2部分 过滤》.pdf

GOST R ISO 13408-3-2011 Aseptic processing of health care products Part 3 Lyophilization《保健品无菌加工 第3部分 冷冻干燥》.pdf

GOST R ISO 13408-4-2011 Aseptic processing of health care products Part 4 Clean-in-place technologies《保健品无菌加工 第4部分 清洗技术》.pdf

GOST R ISO 13408-5-2011 Aseptic processing of health care products Part 5 Sterilization in place《保健品无菌加工 第5部分 原位灭菌》.pdf

GOST R ISO 1346-2014 Fibre ropes Polypropylene split film monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3- 4- 8- and 12-strand ropes Ge.pdf