ONORM M 2019-1987 Fluid power hose assemblies dimensions requirements marking ofconformity《流体动力 软管部件尺寸，要求，合格标识》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 60317-27-2014 en Specifications for particular types of winding wires - Part 27 Paper tape covered rectangular copper wire.pdf

EN 60317-28-2014 en Specifications for particular types of winding wires - Part 28 Polyesterimide enamelled rectangular copper wire class 180.pdf

EN 60317-29-1996 en Specifications for particular types of winding wires Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire class.pdf

EN 60317-31-2016 en Specifications for particular types of winding wires - Part 31 Glass fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperat.pdf

EN 60317-32-2016 en Specifications for particular types of winding wires - Part 32 Glass fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperat.pdf

EN 60317-33-2016 en Specifications for particular types of winding wires - Part 33 Glass fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperat.pdf

EN 60317-35-2014 en Specifications for particular types of winding wires - Part 35 Solderable polyurethane enamelled round copper wire class 155 with a bonding layer.pdf

EN 60317-36-2014 en Specifications for particular types of winding wires - Part 36 Solderable polyesterimide enamelled round copper wire class 180 with a bonding layer.pdf

EN 60317-38-2014 en Specifications for particular types of winding wires - Part 38 Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire class 200.pdf